Heat pumps don't work well when the temperature outside drops below 40 degrees Fahrenheit. The way a heat pump works is by absorbing heat from outside and moving inside using the refrigerant. Much like an air conditioner absorbs the heat from inside of your home and moves it out. Therefore the colder it is outside the less heat a heat pump can produce. The reason they install electric heat strips is to ensure that when the temperature outside gets below 40 you will still have enough heat available to heat the property.
440 tones
It will burn out.
If you have a heat pump and the breaker blows in heat cycle then you probably also have auxiliary electric heat which is drawing too much current because of a faulty heater element.
a fuse
A metal halide ballast works just by transforming the line voltage into much more useful voltage to the metal halide, and by regulating the current so that the bulb will have its useful life at the most.
100 rupees
The cost to dispose of 400w metal-halide lamps can vary depending on location and specific disposal regulations. It is recommended to contact local waste management facilities or recycling centers to inquire about the disposal costs and methods for these lamps.
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
Cold-blooded animals do not produce much body heat. Most do not produce any at all.
No, lighter can produce 120 degree Celsius temperature where as soldering iron can produce 420 degree Celsius temperature. the soldering iron is used to join two metal wires.
700c-1500c
enough.
To find out the cost of operating 60 1000watt Metal Halide lamps for 10 hours, you multiply the amount of power (in kilowatts) by time and hours. That will give you kWh (kilowatt hours), then you find out how much your power costs in $/kWh, then divide the kilowatt hours you are using by the cost ($/kWh).
The answer will depend on the thermal capacity or heat capacity of the metal.
This is different for different metals.
The two 5kW heating elements will produce a total of 10kW of heat when energized simultaneously.