A #1 copper conductor will limit the voltage drop to 3% when supplying 15 amps for 700 feet on a 120 volt system.
The gauge of wire that is 12 volt is 18, 14, and 16.
240
A #2 copper conductor will limit the voltage drop to 3% or less when supplying 60 amps for 260 feet on a 220 volt system.
4800
16 gauge is rated at 13 amps, but I would use 14 gauge which is rated at 15 amps just to be safe.
The gauge of wire that is 12 volt is 18, 14, and 16.
Well, If you mean the fuel pump in the fuel tank, it is a 12 volt pump. The pump runs with the 12 volt system of the car.
No. You need 12 volt AC to run a 12 volt AC motor, not 12 volt DC.
240
zzzzzzzzzzzAAAAAAAAAAAAAAAPPPPPPPPPP !!!!!
Because the voltage is high?
10 gauge will work fine.
Might depend on your local codes, but here it is 6 AWG wire. <<>> A #4 copper conductor will limit the voltage drop to 2% or less when supplying 60 amps for 100 feet on a 230 volt system.
No, you will need two 12 volt batteries connected in series to give the 24 volts necessary to run the pump. It will not run on 12 volts.
AnswerPut some gasoline in a bucket, put the pump in the bucket and use a 12 volt battery to put the pump on. Use a pressure gauge. Put in the output of the hose from where the gasoline will come, and check how many psi the gauge show, I think it has to be 20 or 40 psi.I would use kerosene for the test fluid; way less explosive!
The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.
A #2 copper conductor will limit the voltage drop to 3% or less when supplying 60 amps for 260 feet on a 220 volt system.