0
177 mm squared is equal to 350 MCM AWG.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the ampacity of a 10 sq mm Aluminium wire?
A 10 mm squared conductor is equal to a #8 AWG. A #8 copper conductor with an insulation factor of 75 or 90 degrees C are both rated at 45 amps.
What is the gauge number of the wire with a diameter of 2.0 mm?
AWG # 12 is 2.053 mm in diameter.
How many amps can a 2.5 sq mm wire conduct?
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
What is the Max amp on 10MM cable?
Canada and US - 10 mm is larger that #8 AWG and smaller that #6 AWG. To err on the safe side I will use the #6 AWG equivalent of 60 amps, RW90 insulation, copper wire.
How many amps will taken in sq mm copper wire?
10 amps
Is a point 177 inch the same as an 6 mm?
Nope - .177 inches is equal to 4.4958 mm (You would need 0.23622 inches to equal 6 mm)
Does 1 meter squared equal 1000 millimeters squared?
(1 metre) squared = (1000 mm) squared = 1000000 mm squared.
What is the ampacity of a 10 sq mm Aluminium wire?
A 10 mm squared conductor is equal to a #8 AWG. A #8 copper conductor with an insulation factor of 75 or 90 degrees C are both rated at 45 amps.
what electrical wire size is largest?
Wire size 0000 AWG is the largest electrical wire. It is 0.46 inches in diameter or 11.86 mm in diameter. The cross sectional area is 107.16 mm(squared).
How tall is 177 mm?
10 mm = 1 cm So 177 mm = 17.7 cm (About the height of a pint glass.)
What is ampere rating of a fuse used to protect a 5.5 mm squared conductor?
The equivalent mm2 cross-sectional area of a 5.26 mm2 conductor is a # 10 AWG conductor. A # 10 AWG conductor size is protected by a 30 amp fuse.
How do you convert AWG in to sq-mm?
See this link.
What is the gauge number of the wire with a diameter of 2.0 mm?
AWG # 12 is 2.053 mm in diameter.
How many mm in 1cm squared?
1 cm squared is 10mm by 10mm so 1cm squared equals 100mm squared
What is the diameter of aluminum wires and copper wires for AC 200 amp?
For a 200 amp AC circuit, the recommended wire diameter for aluminum is typically around 2/0 AWG (0.3648 inches) and for copper it is around 4/0 AWG (0.4600 inches). Please consult with a qualified electrician or refer to the National Electrical Code for specific sizing requirements for your installation.
1000cm squared converted to mm squared?
Since there are 10 mm in 1 cm, one must multiply by 10^2 = 100. So the answer is 100,000 mm squared.
What is the radius of a circle with a area of 35 mm squared?
The radius of a circle with an area of 35 mm squared is 3.34mm
