0
What else can I help you with?
What is the distance from the floor for a bedside light switch?
in the USA if following the NEC there is no specific requirement for wall switch heights for general lighting There may be requirements for machinery
How tall are power lines?
Typical height ranges from 15 to 55 metres (49 to 180 ft), although heights in excess of 300 metres (980 ft) do exist. Check Wikipedia out for more info. I needed to know the heights so I could compare wind turbine proposals with something already in the landscape.
What Did the Electrician say After Fixing a Light Bulb at the Top of the Ewpire state Buildingt answers?
Well, honey, that electrician probably said something like, "Well, that was a bright idea!" But who knows, maybe they just muttered some choice words under their breath about heights and tiny light bulbs. Either way, job done, lights on, and hopefully no one got zapped in the process.
How far are electricity poles apart?
The route for an overhead electricity line is surveyed to provide a profile (gradients) of the route -including any obstacles (roadways, rivers, outbuildings, etc.). Wherever possible, individual poles are placed where they will cause the least obstruction to farmers' machinery, etc. Ideally, means utilising natural or man-made features -e.g. following hedgerows, stone walls, etc. But, ultimately, their locations and, therefore, their distances apart, depend upon ensuring that the conductor sag remains above the minimum safety clearance, allowing for changes in temperature, ice loading, etc., and taking into account the profile (gradients) of the land and obstacles along their route. This is determined by a combination of the heights of adjacent poles and their distances apart and gradients/obstacles between. For routes across open, flat, countryside, the poles are likely to be roughly equidistant but, for route profiles that vary considerably in height, with obstacles, these distances can vary considerably.
What is potential difference or voltage?
If you take two different nodes in a network and if you find the difference in voltage for those nodes then it is known as potential or voltage difference. Here the reference is not taken. But if you find potential difference between a node and its respective ground it is known as voltage at that node here reference is ground potential i.e zero.Answer'Voltage' is synonymous with 'potential difference'; they both mean the same thing. And it is important that these terms are not confused with 'potential'. So, it is incorrect to say 'voltage difference' (which would mean 'potential difference difference'!), or to describe a voltage as existing 'at' a particular point, or 'with reference to', for example, earth or ground.In very simple terms, if two points are at different potentials, then there is a potential difference (or 'voltage') between them. A potential exists when work is done moving a charge to a particular point; the greater the work, the higher the potential. 'Potential' is roughly equivalent to the potential energy gained by an object when it is lifted against the force of gravity.Think of it this way: 'potential' is equivalent to 'height', whereas 'potential difference' (voltage) is equivalent to the difference between points at different heights.
What is the PEC requirement regarding the standard heights for switches and?
one foot from ground floor distance outlet five foot distance switch
What is the Kansas requirement for handicap sign heights?
6 feet tall is the requirement for handicap signs.
What is standard ceiling heights in a home in Virginia?
The standard ceiling height is 8 feet.
What are the required heights for the Twilight Zone Tower of Terror?
The height requirement to ride is - 40" (102cm)
What are the standard heights for counter stools?
There is actually quite a range for counter stool heights due to the various heights of counters these days. The heights range from 24" to 33". The most common 24-26".
What is the ADA height requirement for nurse call stations?
The recommended heights for the nurse call devices in restroom
What are Standard tailoring cutting table heights?
42"Table htThamks
What are the standard toilet seat heights and how do they vary in different types of toilets?
Standard toilet seat heights typically range from 15 to 17 inches. However, heights can vary depending on the type of toilet. For example, comfort height toilets are taller, usually around 17 to 19 inches, while standard toilets are shorter at around 14 to 15 inches. Wall-mounted toilets may have adjustable heights based on installation.
What Is the standard height from the floor to the top of doors and windows in residences?
What are the standard heights from the floor to the top of door and windows in residences
What is the standard deviation of male height in a given population?
The standard deviation of male height in a population is a measure of how spread out the heights are from the average height of males in that population. It helps to understand the variability in male heights within the group.
Small standard deviation show what the disturbution?
It shows primarily that the measurement unit used for recording the data is very large. For example, the standard deviation of the heights of individuals, when recorded in metres, will be one hundredth of the standard deviation of their heights when recorded in centimetres. The process is known as coding.
What are standard study table heights?
Standard study table heights typically range from 28 to 30 inches. However, adjustable height tables are also available to accommodate individuals of different heights and preferences. It's important to consider the user's body proportions and comfort when selecting a study table height.
