0
Many residential 40 gallon water heaters use either 8 or 10 awg wiring. However, you should always consult with your local building inspection department and a licensed electrician.
Depends on the size of the heater but home water heaters normally require AWG#10 wire on a 30 amp breaker.
Copper, two conductor, #12 wire which is rated for 20 amps. Code allows 80% use which is 80% x 20 = 16 amps times 240 volts = 3840 watts connected load allowed.
Add your answer:
Earn +20 pts
What ampacity should branch circuit conductors have?
Branch circuits wire sizes are governed by the connected load amperage of the circuit. The wire size ampacity then governs the size of the breaker that is used to protect the circuit from overloading. For general home wiring circuits the conductors used are, receptacles and lighting #14 - 15 amps, dedicated circuits load dependant, hot water tank and baseboard heaters #12 - 20 amps, clothes dryer #10 - 30 amps, range #8 -- 40 amps.
When a larger load is controlled by a small wire what device is used?
When a large load is controlled by a small wire, what device is used?
Which wire used for ordinary light bulb?
In most home wiring circuits, the black wire is used to power a light bulb. The other wire is white and is called the neutral conductor.
What gauge wire is used for electric furnace heating elements?
normally 8 gauge wire is used for electric heat furnaces.
What are the different RTD types?
2 wire.3 wire nd 4 wire...rtd... 3 wire rtd is widly used....hv good accuracy...
Items that use low resistance wire?
Ni chrome is a low resistance wire used in heaters and toasters.
What element heats elements in toasters?
It is nearly always Nichrome wire. The same is used for space heaters, etc.
How do you wire 240volt heaters in series?
To wire 240-volt heaters in series, connect the first heater's one wire to the second heater's other wire. Then connect the first heater's remaining wire to one of the hot wires from the power source, and the second heater's remaining wire to the other hot wire from the power source. Make sure both heaters have the same wattage rating for this setup to work effectively.
What are the three types of wires which are used for most homes and farms?
12 gauge wire is normally used for homes and farms for lighting and receptacles. The wire colors are black, white and green. Red wires are sometimes used in wiring switches. Larger gauge wires are used for electrical ranges, furnances, dryers, hot water heaters and air conditioners.
Why tungsten wire is not used in an electric heater?
Tungsten wire is not commonly used in electric heaters due to its high melting point and cost. While tungsten can withstand high temperatures, it is more expensive than other materials like nichrome that are commonly used for heating elements. Nichrome is a more cost-effective option that provides similar heat-resistant properties for electric heaters.
Why tungsten metal wire is not used in heater?
A heater does not get hot enough to benefit from the expense of using tungsten wire. Most heaters use either wire made of an alloy called nichrome or plated ceramic heating elements. Heaters generally operate at red or orange heat (i.e. 1409F to 1908F) and can use nichrome wire. Lightbulbs operate at white heat (i.e. greater than 2309F) and use tungsten wire, but tungsten is hard and expensive to make into wire compared to softer metals.
What kind of wire is best for learning wire crochet?
Wire crochet has become a very popular handicraft mostly used for making jewelry. The best kind of wire to use to learn the technique is a 22 or 24 gauge jewelry wire.
How hot does a hot wire strip heaters wire get?
Hot wire strip heaters are used for usually sealing two pieces of poly together to form a bag or band around an object. Due to the variable types of poly used and different manufactures specifications , one heat can not be used for all occasions. There is a thermostat that is added in line with the hot wire to control the temperature of the wire. This thermostat limits the heating of the wire so as to get the melting point of the poly just right. If a strip heating wire is left full on it will get red hot and usually burn itself up. Nickel chrome wire has a melting point of 1400 degrees C.
When wiring a house do you have to use the black wire as the hot wire?
No, the black wire is typically used as the hot wire in residential electrical wiring, but it is not a requirement. It's essential to follow local electrical codes and standards when wiring a house to ensure safety and proper functioning of the electrical system.
What is the white material inside electric heaters?
The white material inside electric heaters is magnesium oxide. This same material is used in Pyrotenax cables to withstand heat in high ambient temperature areas. On these cables a #14 wire is given a 20 amp current rating.
How do you wire in a lowvoltage thermostat control to a baseboard heater?
Most baseboard heaters use hi voltage thermostats.
What kind of wire can be used to make a magnet?
A copper wire can be used to make an electromagnet by wrapping it around a magnetic core material such as iron. When an electric current flows through the wire, it creates a magnetic field around the wire, which magnetizes the core material.
