0
Add your answer:
Earn +20 pts
What is the cable size for 1 to 100 Amp current list?
25mm cable
Could you Calculate cable size for 100 kw load?
To calculate the cable size for a 100 kW load, you would need to consider factors such as the voltage of the system, the type of cable insulation, the ambient temperature, and the installation method. The cable size is typically determined by the maximum current the cable will carry without overheating. Using the formula: Cable size (mm²) = (2 x L x I x R) / (√3 x V x cosΦ), where L is the cable length, I is the load current, R is the resistance of the cable, V is the voltage, and cosΦ is the power factor, you can calculate the appropriate cable size for the 100 kW load.
What size aluminum entrance cable for 100 Amp service?
2 AWG Aluminum.
What is the cable size for a 1500 kVA generator with cable length of 50 meters?
35 KVA generator using for load 100 meter length which cable need to used
What re size for a 220 volt 100 amp panel distance d 100 feet?
A #1 copper or 1/0 aluminium conductor will limit the voltage drop to 3% or less when supplying 100 amps for 100 feet on a 240 volt a single phase system.
What is the cable size for 1 to 100 Amp current list?
25mm cable
What size underground service entry cable needed for 100 amp sub panel 600 feet from main?
AWG 2/0 copper.
A computer and a router are 3.3 feet apart. how long should the cable be?
100 feet
What is the recommended gauge size for a 100 amp cable?
The recommended gauge size for a 100 amp cable is typically 3 AWG (American Wire Gauge) for copper wire.
What size service cable for 100 amp main panel 100 feet away?
For a 100 amp main panel located 100 feet away, it is recommended to use a 2/0 copper or 4/0 aluminum service cable to ensure proper voltage drop and capacity for the distance. Consult with a licensed electrician to determine the specific requirements based on local codes and conditions.
What is the start up amps on a 200 hp 3 phase 480 volt motor?
i have 200 hp motor what i need cable size in 100 feet distance
Is it ok to use 100 feet of cat 6 cable?
Yes - the maximum segment length is usually 100 meters, or 330 feet.
What is the recommended cable size for a 100 amp electrical circuit?
The recommended cable size for a 100 amp electrical circuit is typically 3 AWG copper or 1/0 AWG aluminum.
Could you Calculate cable size for 100 kw load?
To calculate the cable size for a 100 kW load, you would need to consider factors such as the voltage of the system, the type of cable insulation, the ambient temperature, and the installation method. The cable size is typically determined by the maximum current the cable will carry without overheating. Using the formula: Cable size (mm²) = (2 x L x I x R) / (√3 x V x cosΦ), where L is the cable length, I is the load current, R is the resistance of the cable, V is the voltage, and cosΦ is the power factor, you can calculate the appropriate cable size for the 100 kW load.
What is the maximum lenght of a cable on a 100BaseT network?
100 meters or 328 feet
What is the maximum length for satellite cable lnb to receiver?
Approximately 100 feet.
Where can one purchase 100 feet Cat5e cables?
100 feet Cat5e cables can be purchased through many different locations. Some common places to look are Firefold, Cable Wholesale and Cable and Kits through the internet.
