0
What else can I help you with?
If you have a 125 amp breaker box on the pole with a 125 amp breaker going to your house and you get a hot tub that needs a 60 amp GFI breaker would that overload the box?
It depends on what else you are running in the house. Add up your amperage to see if it is more than the 125amp rating. Which should be below 105 amps constant to keep from overheating the main breaker. If you are not running a big central ac system or a electric oven and water heater you should have no problem running the hot tub.
Can 3.55 watt oven run on 20amp hard wire?
To answer this question the voltage of the oven must be stated. Also double check on the wattage of the oven 3.55 watts seems low. Maybe it should be 3.55 kWs. Amps = Watts/Volts.
What size breaker should be used for a double oven?
50 amp breaker wired with AWG # 6 wire.
How much should it cost for the electrical wiring of a new build house in the alp region of France Approx 200 square meters?
Its very difficult to assess the cost as it will require costings of howmany mains lines and sockets required in each room, lighting sockets, utility sockets such as cooker, hob, oven. Bathroom requirements i.e. shower, shaver etc
What size breaker should be used for a 3.6 kW oven?
3000 / 240 = Amps. You de-rate a breaker by 20 % for continuous load like an oven. You could get by with a 20 Amp breaker and 12 AWG wire. However, I would recommend 30 Amps and 10 AWG for an oven for the long run.
Wiring a wall oven?
Yes, a wall oven needs wiring to operate.
Why is the breaker tripping when you turn on the oven?
An electrical short in the wiring, or a defect in the oven itself. Have it checked out by a qualified technician.
How should I properly install and connect the oven wiring to ensure safe and efficient operation?
To properly install and connect oven wiring for safe and efficient operation, follow these steps: Turn off the power supply to the oven. Check the wiring diagram to ensure proper connections. Use the correct gauge wire for the oven's electrical requirements. Connect the wires according to the diagram, ensuring tight and secure connections. Use wire nuts to secure the connections and cover them with electrical tape. Double-check all connections before turning the power back on. Test the oven to ensure it is working properly before regular use.
Can you hook up a a separate stove top oven and separate oven on the same circuit?
No, the electrical code requires that each be on it's own circuit.
What temperature should I use to bake bacon in the oven?
For baking bacon in the oven, you should preheat the oven to 400F (200C).
What temperature should I cook meatloaf in the oven at?
You should cook meatloaf in the oven at a temperature of 350F.
What temperature should bacon be cooked at in the oven?
Bacon should be cooked in the oven at a temperature of 400F.
What safety precautions should be taken when resetting the oven circuit breaker after it has tripped?
Before resetting the oven circuit breaker, ensure the oven is turned off and unplugged to prevent electrical shock. Check for any signs of damage or overheating in the wiring. Once confirmed safe, reset the breaker and monitor the oven for any unusual behavior. If the breaker continues to trip, seek professional help to avoid potential hazards.
A wall oven requires a booster transformer to make it heat up and it has been suggested that this be installed in a bedroom closet next to the electrical box but are there any dangers?
This is just a guess, but it sounds like the person fitting the oven does not want to have a new 240 Volt circuit installed to supply the oven and plans to use an existing 120 Volt wall outlet using a 120-to-240 Volt step-up transformer. To conform to the latest Wiring Codes, a wall oven usually has to have its own dedicated circuit with correctly sized breakers, wiring and outlet. The circuit should be designed to supply whatever voltage and current the wall oven requires without using any separate transformer. Are you are having the wall oven installed by a licensed electrician or by a kitchen fitter? If you are not sure if the person who is talking about using a transformer is actually a licensed electrician who is following the Wiring Codes for your locality (Town/State) then the best advice anyone should give you is to refuse to have any electrical work done for your wall oven until you have had a second opinion from an independent licensed electrician or electrical engineer.
Can you change from aluminum wire to copper wire in a new oven?
It is not recommended to change the type of wire used in an appliance as it can affect the appliance's performance and safety. It is best to follow the manufacturer's recommendations for wiring specifications to ensure the oven operates safely and efficiently. If you have concerns about the wiring, it is best to consult a professional electrician.
What temperature should I cook a pork tenderloin in the oven at?
You should cook a pork tenderloin in the oven at a temperature of 375F.
What temperature should I cook pork tenderloin in the oven at?
You should cook pork tenderloin in the oven at a temperature of 375F.
