There is no flat conversion from volume to weight; it all depends on the material you need to weigh. Based on some quick searches, it looks like a gallon of sand is approximately 200 oz, or 12.5 pounds. So based on that measurement, it would be about 62.5 pounds. However, not all sand is created equal, and the sand you're using may be coarser or finer or made of an entirely different material. I would take a smaller measurement of 1 or 2 cups, weigh that in ounces, then make your conversion.
43 pounds
1800kg/m3
sand=2*Weight of Cement water=cement/2
The type of sand is also important. The right ratio for a mixture of cement and sand is 1:5 to 1:6
1 yard of mix ready weight please
No, water and sand have different densities. Water is denser than sand, so 34 gallons of water will weigh more than 34 gallons of sand.
Five gallons of sand would actually weigh more than five gallons of water.
5 gallons = 1155 cubic inches = 0.6684 cubic footWe don't know the weight without more specific knowledge of the type of sand.
On average, 5 gallons of sand weighs approximately 50-60 pounds, depending on the type of sand and its moisture content.
The weight of sand can vary depending on its composition, but on average, dry sand weighs about 100-120 pounds per cubic foot. Therefore, 24 gallons of sand would weigh approximately 200-240 pounds.
A general formula:mass (kg) = density (kg/m3) × volume (m3)weight at sea level (lbs) = mass (kg) × 2.20462262Volume:5 UK gallons = 0.02273045 m3Densities, approximate:loose dry sand ≈ 1442 kg/m3dry sand ≈ 1602 kg/m3wet sand ≈ 1922 kg/m3quartz sand ≈ 1201 kg/m3Choose the appropriate volume and density for your application and apply the general formula.m = d × vw = m × 2.20462262For 5 UK dry gallons of loose dry sand, you get:1442 kg/m3 × 0.0227 m3 ≈ 32.78 kg32.78 kg × 2.20462 ≈ 72.3 lbs
A general formula: mass (kg) = density (kg/m3) × volume (m3) weight at sea level (lbs) = mass (kg) × 2.20462262 Volumes, 5 gallons: 5 US dry gallons = 0.02202442 m3 5 US liquid gallons = 0.01892706 m3 5 UK gallons = 0.02273045 m3 "5 gallon" bucket (15" h. x 12" w.) = 0.02780000 m3, to rim Densities, approximate: loose dry sand ≈ 1442 kg/m3 dry sand ≈ 1602 kg/m3 wet sand ≈ 1922 kg/m3 quartz sand ≈ 1201 kg/m3 Choose the appropriate volume and density for your application and apply the general formula. m = d × v w = m × 2.20462262 For a typical "5 gallon" bucket, which holds 6.3 US dry / 7.3 US liq. / 6.1 UK gallons to the rim, filled with loose dry sand, you get: 1442 kg/m3 × 0.0278 m3 ≈ 40.09 kg 40.09 kg × 2.20462 ≈ 88.4 lbs Some solutions for loose dry sand: "5 gal." bucket: ~ 88.4 lbs 5 US dry gal.: ~ 70.0 lbs 5 US liq. gal.: ~ 60.2 lbs 5 UK gal.: ~ 72.3 lbs
A gallon of cement typically weighs around 12.5 pounds, so 5 gallons of cement would weigh around 62.5 pounds.
43 pounds
APPROXIMATELY 285,000 LBS. DRY WEIGHT. YOU WOULD NEED TO ADD THE WEIGHT OF 2500 GALLONS OF DIESEL, 295 GALLONS OF OIL, 395 GALLONS OF COOLING WATER, AND APPROXIMATELY 4000 LBS OF TRACTION SAND. RAILROAD EMPLOYEE 12YRS.
The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!The weight of sand (or anything else) is not measured in cubic metres!
Five gallons of kerosene weigh approximately 36.7 pounds.