Wiki User
∙ 15y agokg = 6.16546 x width mm x OD2 x bore2 ---- 1000000
Wiki User
∙ 15y agoFormula to calculate length of spiral reinforcement in columns
Weight of pipe per Meter in Kg for MS Pipes = 3.14 * (Outer diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850
ON the cad offset the bend radius from the internal radius of the sheet metal part by 40% of the total sheet thickness,and measure the chord length of the radius. that will be the developed length.
I dnt kno..:I
The hollow block sizes in the Philippines are the following:40cm (length) X 20 cm (width) X 4 in (thickness)40cm (length) X 20 cm (width) X 5 in (thickness)40cm (length) X 20 cm (width) X 6 in (thickness)
To calculate the weight of a galvanized sheet, you would first need to know its dimensions (length, width, and thickness) in meters. Then, you can use the formula: Weight = Length x Width x Thickness x Density of galvanized sheet. The density of galvanized sheet may vary slightly depending on the composition of the galvanized coating, but a common value is around 7850 kg/m³.
To calculate the weight of a galvanized steel pipe, you need to know the length, diameter, and thickness of the pipe. Use the formula: weight = (outer diameter - thickness) x thickness x 0.02466 x length. This formula assumes the density of steel as 7850 kg/m^3 and the length in meters.
To calculate the weight of a GI sheet, you need to know its length, width, and thickness, as well as the density of the material (galvanized iron). The weight can be calculated using the formula: Weight = Length x Width x Thickness x Density of GI sheet. The density of galvanized iron typically ranges from 7850 to 8050 kg/m³.
density=mass/volume 7.850=2500kg/(0.47*L*0.914) Ravindra
It looks like you meant width or thickness. This is the formula to calculate volume or capacity of a rectangular prism (a box).
Formula to calculate length of spiral reinforcement in columns
MA= resistance force / effort force = Fr/Fe
There is no formula to calculate the length of a wire. The length of a wire is determined by the distance from the power source to where the load is situated.
The weight of a 50X6mm GI strip will depend on the density of the galvanized iron material. You can calculate the weight by multiplying the volume of the strip (length x width x thickness) by the density of the material.
If the bar is a three dimensional object it will have some thickness. Then, assuming it is oblong in shape and knowing its length, width and thickness: Surface_area = 2 x (length x width + width x thickness + thickness x length)
To convert GI strip weight in kilograms to length in meters, you would need to know the dimensions (width, thickness) of the strip. The density of the material (Galvanized Iron in this case) will also be necessary. Then you can use the formula: length (m) = weight (kg) / (density (kg/m³) * width (m) * thickness (m)). This will give you the length of the strip in meters.
The formula to calculate the density of cement fiber boards is: Density = Mass / Volume Measure the mass (weight) of the board, then calculate the volume by multiplying the length, width, and thickness of the board. Finally, divide the mass by the volume to get the density.