cm per second x 1.97 (or 1.96850394) = feet per minute* 68.2 x 1.97 = 134.354 feet per second
Cmh = cubic meters per hour cfm = cubic feet per minute m3/hr * 35.3ft3/m3 * hr/60minutes = ft3/minute So, 1 cmh = 0.5883 cfm
I assume you are a student. This is a very simple conversion. I suggest you get familiar with conversion tables, on paper and computer based like this one http://joshmadison.com/article/convert-for-windows/ because this is a super-easy task you will be doing daily as a technical professional.
IEEE1394a runs at 400 to 3200 Megabits/second. aka Apple firewire.
Wavelength = (speed of light) divided by (frequency) Wavelength = (300,000,000 meters/second) divided by (frequency) If the frequency is 1 MHz, then wavelength = (300,000,000 / 1,000,000) = 300 meters = 984 feet A smart engineer calculated the magic number 984 so that you could do all your arithmetic in megahertz and feet, instead of hertz and meters.
Multiply feet per second by 18.288 to get meters per minute.
Divide by 60.
You can't. Meters per second is a straight off speed, CFM(cubic feet per minute) is a flow rate. You could convert cubic meters/second into CFM though. Here's a link that'll help you with that:http://www.heatsink-guide.com/content.php?content=conversion.shtml
Multiply meters per minute by 3.28 to get feet per minute.
Insert your figures into this equation: cubic meters per second x 2118.88 = cubic feet per minute5.1m3/s x 2118.88 = about 10,806.3ft3/minute
48 feet per minute = 0.24384 meters per second.
Easy! Divide by 200. So 1000 feet per minute = 5 metres per second (roughly). It also equals 10 knots incidentally.
-- to convert the feet to inches, multiply by 12-- to convert the minute to second, divide by 60-- combining these operations, take (feet per minute) and multiply by (12/60) = 0.2
To convert 60 feet per minute to meters per second, you can use the conversion factor of 1 foot = 0.3048 meters and 1 minute = 60 seconds. Multiply 60 feet/minute by the conversion factor to get meters/second. This results in 1 foot per minute being approximately 0.3048/60 meters per second.
To convert feet per second to meters per hour, you first convert feet to meters by multiplying by 0.3048 and then convert seconds to hours by dividing by 3600. Therefore, 217.65 feet per second is approximately 148.53 meters per hour.
Multiply feet per second by 0.3048 to get meters per second.
32 feet per second squared equates to 35,112.96 meters per minute squared.