0
What else can I help you with?
Where does the supply authorities cable enter a building?
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
Does a 1993 Acura Legend v6 3.2 have a speed-o-meter cable or is it electric If electric where is the sensor exactly?
== acura speed sensor }
How the center of the center tapped transformer is zero volts?
The centre of the (secondary of the) centre tapped transformer is zero volts because that is the point in the circuit on which you based your measurement. If you were to connect the reference meter lead to the end of the winding, then the centre tap would have voltage on it. Its all a matter of perspective, i.e. reference. It also happens that the centre tap is usually grounded and, since you usually connect the meter's reference lead to ground, if you connect the meter's reading lead to the same point, you would logically expect there to be a zero volts differential. Its the same as connecting the two leads together.
What is tapped hole?
That is hole that has been drilled, then had a thread 'tapped' into it so you can insert a machine screw or bolt.
Why do some products use tapped holes and some use nuts?
You can not make effective tapped holes in many products.
Where does the supply authorities cable enter a building?
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
How a digital electric more useful than an analog electric meter?
in a digital meter you get a digital value of your measurement. but in analog meter you have to check the position of the pin along the scale and find out the value.
What is the unit of electric flux?
The unit of electric flux is Volt-meter or Newton-meter^2 Coulomb^-1.
Is it legal for two tenants to share one electric meter?
one electric meter two shoap in legal .
Does a electric meter measure the number of protons in a current?
No, an electric meter measures the amount of electric charge passing through a circuit per unit time. The number of protons in a current is not relevant to the measurement of electricity by an electric meter.
How do you find out if your cell phones tapped?
it will have a finger print
Why there is a multiplier in electric meter?
Cause there is ...
How can I learn how to read an electric meter?
To learn how to read an electric meter, you can start by familiarizing yourself with the different dials and numbers on the meter. Then, regularly check and record the numbers displayed on the meter to track your electricity usage. You can also reach out to your utility company for guidance or resources on reading your specific type of electric meter.
How do you find the fuse line in a house?
If you are looking for the main panel, look for where wires enter the house or where the electric meter is located.
How do you find the fuse for the 1990 acuralegend if battry is not charging-o-meter cable or is it electric If electric where is the sensor exactly?
= Answering "http://wiki.answers.com/Q/How_do_you_find_the_fuse_for_the_1990_acuralegend_if_battry_is_not_charging-o-meter_cable_or_is_it_electric_If_electric_where_is_the_sensor_exactly" =
Function block diagram of the digital multimeter?
A digital multi meter is what is used to find electric current. A block diagram shows all of the working parts of the multi meter and how they are connected.
Do tapped artifacts still work when they are tapped?
No, tapped artifacts do not work when they are tapped.
