Wiki User
∙ 14y agoThat would depend on the kind of wood, growth ring spacing, moisture content, whether or not there are knots or other defects in the wood, how it is cut, if the piece of wood is pressure treated, if it is engineered wood (plywood, oriented strand board, particle board, etc.), how wide of a gap the wood is covering, how heavy the car is, how fast it is traveling, if it is traveling over the wood at an angle, and probably a few more factors I haven't thought of.
I don't think you provided enough information. Try again.
Wiki User
∙ 14y agoWeight of pipe per Meter in Kg for MS Pipes = 3.14 * (Outer diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850
7.3005
=3.14 * (Diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850
50x30x715 heightx2.5 thickness
on a solid structure the bearing weight is according to thickness x.414 +span
as weight(w)=mg,therefore dimension of wight is ML PER T SQUARE
The thickness of paper is typically measured using a caliper or micrometer. The formula to calculate the thickness of paper is thickness = weight / (length x basis weight), where weight is the weight of the paper in grams, length is the length of the paper tested in centimeters, and basis weight is the weight of the paper in grams per square meter.
In typesetting, the thickness of a line is called its weight and is measured in points.
what is thge weight of 20mm thick plate of dimension 60202525
yes
weight
depends on the size of the drum. If you want to the weight to include the weight of the drum then the material which the drum is made and its specifications such as wall thickness and type of opening would be required.
The weight of a hollow MS (mild steel) pipe depends on the thickness of the pipe wall. The weight can be calculated by using the formula: Weight = 0.02466 * Thickness * (Outer Diameter - Thickness) for a round hollow pipe.
specific weight of the sheet * area *thickness = weight of the sheet
A laminate shingle's weight will vary a great deal depending on its dimension and thickness. A rough estimate would be that enough shingles to cover 100 square feet would weigh around 240 pounds.
Table dimension is 59"x35"x29" please calculate volumetric weight in KG Table dimension is 59"x35"x29" please calculate volumetric weight in KG {| |- | Volumetric WeightVolumetric WeightVolumetric Weight * Volumetric Weight|}
To calculate the weight of coating, you need to know the area to be coated, the density of the coating material, and the desired thickness of the coating. The formula commonly used is: Weight = Area x Density x Thickness. Multiply the area by the density of the coating material and the desired thickness to determine the weight of the coating needed.