1.5 hours if the rate of flow is constant.
1 hour and a half, or 90 minutes.
1.5 hours
15000waypoint / 1600gallons/h = Time9.375 hours
A day or 2 depending on the water pressure
It would take approximately 9 hours, 22 minutes, and 30 seconds to fill a 15,000 gallon pool with a garden house that blasts out 1,600 gallons an hour. But that does not take into account chemical levels. In order to have a safe pool, free of infection-causing bacteria, you would need to adjust the pH level and total alkaline level of your pool.
To determine water pressure using the time it takes to fill a two-gallon bucket, you first measure the time it takes for the bucket to fill completely. Then, you can calculate the flow rate by dividing the volume of the bucket (two gallons) by the time taken (in minutes or seconds). A faster fill time indicates higher water pressure, while a slower fill time suggests lower pressure. This method provides a practical, though indirect, assessment of water pressure in a plumbing system.
To determine how long it would take to fill 1 gallon with a drip occurring once per second, we first need to know how many drips are required to fill a gallon. There are approximately 128 ounces in a gallon, and if we assume each drip is about 0.05 ounces, it would take around 2,560 drips to fill a gallon. Therefore, at a rate of one drip per second, it would take approximately 2,560 seconds, or about 42.67 minutes, to fill 1 gallon.
Fill a gallon bucket, timing how long it takes to do so. Then fill your hot tub using the same source... example: if you filled the bucket with a hose, then fill the tub using the same hose. Then time how long it takes to fill the tub and divide the time it takes to fill the tub by the time it takes to fill the bucket and then you know how many gallons it is.
it takes 1 hour it takes 1 hour
1 hour
58
depends on how fast you put your change in