off course you can
Chat with our AI personalities
12x12 square hole in basement floor what is it for
Saber saw ... plus a drill for a starter hole (or 4 corner holes).
The round manhole cannot fall into the hole no matter which way you turn it.
[despite the fact that this is under "rhetorical questions" I will answer it anyways] Man-holes are round because no matter which way you turn the lid, it will never fit into the round hole (With a slightly smaller diameter). If it were any other shape, like a square or triangle, it would be possible to drop the lid in the hole by turning it diagonally.
There is no dirt in the hole, but if you want to know how much dirt was removed to create the hole, then:3 acres is an amount of area (you don't have 'square acres'). You could express this volume as acre-feet, but this term is usually used when referring to flooding (an acre of land flooded with 1 foot of water, for example). 1 acre = 43560 square feet, so 3 acres = 130680 square feet.(130680 square feet)*(200 feet) = 26136000 cubic feet {26.136 million cubic feet} In the dirt industry, the standard measurement is cubic yards {often referred to as just 'yards' of dirt}. There are 27 cubic feet in a cubic yard, so this is equivalent to 968000 cubic yards.
yes because square numbers have to be hole numbers to be square
does not matter - you are still in the wrong place. But the square peg is the original
12x12 square hole in basement floor what is it for
Square Peg In A Round Hole - album - was created on 2012-03-19.
A jigsaw is the best tool to use for cutting a square hole in wood.
To cut a square hole in wood effectively, use a square drill bit or a chisel and mallet to carefully remove the material within the marked square area. Make sure to measure and mark the square hole accurately before cutting to ensure a precise result.
If the hole is a square then there is 36 cubic feet of dirt in the hole.
There are many old Chinese coins that have a square hole in them. These coins could date back 2400 years ago.
You can't, a hole has volume and thefore needs to be measured in cubic footage. Square footage is a measure of area not volume.
To cut a square hole in wood, you can use a saw to make straight cuts along the edges of the square outline you want to create. Then, use a chisel to remove the wood within the outline and create the square hole. Make sure to measure and mark the square accurately before cutting to ensure a precise result.
A square hole can be cut in wood without using a jigsaw by using a chisel and a mallet. The process involves marking the square shape on the wood, making multiple cuts along the lines with the chisel, and then removing the excess wood to create the square hole.
The area of Hell Hole Swamp is 8,599,569.8976 square meters.