if u know the t5he radius of the cylinder u can easily find the diameter the formula is d=2r where d =diameter and r=radius
The volume is 628.32 cubic inches.
The question cannot be answered. There is no information on what aspect of the cylinder is 14 cm: the radius, diameter, circumference, height.
The diameter cannot be "8 in and 5 in".
The diameter of a cylinder is not related to its height. A cylinder with a diameter of 8 can have any height. Also, don't measure geometric figures without using a unit of measurement. A diameter is 8 something, it could be 8 centimeters, 8 inches, 8 miles, and so forth, it is not just 8.
A cylinder has a diameter and a perpendicular height and cylindrical in shape.
The diameter is the length of a line segment perpendicular to the side of the cylinder, passing through the center of the cylinder, from a point on one side to a point on the opposite side of the cylinder. It is also twice the radius and is related to the circumference by a factor of pi.
A round bath is a cylinder. The volume of a cylinder = area of the base x perpendicular height. Area of the base is πr2 (pi x radius x radius). The radius is half the diameter. The diameter is the width of the circular base. The perpendicular height will be the depth of the water, whether it's up to the top or up to where you have a bath.
. . the chord.
A circle can have perpendicular bisector lines by means of its diameter.
The cylinder's diameter will be about 32.58m
the width of the cylinder
yes
The bore of a cylinder describes is measurement, in millimeters or inches, of the inside diameter of the cylinder. The diameter is the width across.
If you have a physical cylinder to measure, measure the "width" of the circle that is the cross section of the cylinder. That is the diameter, Half the diameter is the radius.
The diameter, alone, is not enough to find the volume of a cylinder. You need the height as well. > Where pi = 3.1416, and d = cylinder diameter cylinder volume = pi * (d/2)2 * length of cylinder
It depends what you know. The top of a cylinder is in the shape of a circle. So, to find the diameter of the cylinder (which is also the diameter of the circle), if you know the radius, just multiply it by two.