answersLogoWhite

0

60 inches

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Would a ten foot piece of electrical conduit attached to the peak of a shed acting as an extension for a bird feeder attract lightning?

While metal structures can attract lightning, a 10-foot piece of electrical conduit is relatively short. It may attract lightning if it is the tallest point in the immediate vicinity. To minimize risk, install a lightning rod or ensure that the conduit is not the highest point on the shed.


What is 20 foot long?

A piece of plank that is 240 inches long is 20 foot long.


How many inches long is a piece of ribbon that measures 1 foot 7inches?

19 inches


Amy cuts a piece of 60in long How many feet long is the piece of ribion?

There are 12 inches in a foot. Therefore, divide the inches by 12.


What is the taper per foot for a piece 7.5 inches long with a 0.056 taper?

The taper, per foot, is 0.0896


How far from a junction box must emt conduit be strapped?

I always put the first EMT clip/strap 1 foot or 12 inches away from the junction box, then every 5 feet or so after that.


How many inches long is a piece of yarn that is 5 feet long?

1 foot = 12 inches5 feet = 60 inches


How many 12 inch sections can you get out of a 9 foot piece of plywood?

1 foot = 12 inches so 9 ft = 9*12 inches so 9 sections!


How many 5 inch squares can you cut in a 9 square foot piece of fabric?

The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.


How much inches are in foot?

There are 12 inches in one foot.1 foot = 12 inchesThere are 12 inches in one foot and there are 3 feet in one yard.12


How Many W Inch Sections Can You Get Out Of The 9 Foot Piece Of Plywood?

To determine how many W-inch sections you can get from a 9-foot piece of plywood, first convert the length of the plywood into inches. Since 9 feet equals 108 inches, you would divide 108 inches by W inches. The formula would be: Number of sections = 108 / W. The result will give you the total number of W-inch sections you can cut from the 9-foot plywood.


What if 6 foot long piece of wood cut off piece of wood that was 18 incheslong how many feet is left?

4 feet 6 inches