1 foot = 12 inches so 9 ft = 9*12 inches so 9 sections!
A 9-foot piece of plywood is 108 inches long. If you want to cut it into 12-inch sections, you can theoretically get 9 sections (108 ÷ 12 = 9). However, each cut removes 18 inches in total, so to make 8 cuts to achieve 9 sections, you need to account for the 18 inches lost. This means you lose 18 inches from the 108 inches, leaving you with 90 inches, which can only yield 7 full 12-inch sections (90 ÷ 12 = 7.5). Thus, you can get 7 complete 12-inch sections.
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.
The easiest way to determine an honest weight of a 4' x 8' sheet of plywood? 20-25 pounds per 1/4" of thickness. 3 pounds per square foot per inch of thickness according to APA Plywood Design Specification.
The number of sheets of plywood on a pallet can vary depending on the thickness of the plywood and the specifications of the manufacturer. Typically, a standard pallet holds around 40 sheets of 4x8-foot plywood that is 1/2 inch thick. However, this number can change if the plywood is thicker or thinner, or if the pallet itself is designed differently. Always check with the supplier for exact quantities.
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
A 9-foot piece of plywood is 108 inches long. If you want to cut it into 12-inch sections, you can theoretically get 9 sections (108 ÷ 12 = 9). However, each cut removes 18 inches in total, so to make 8 cuts to achieve 9 sections, you need to account for the 18 inches lost. This means you lose 18 inches from the 108 inches, leaving you with 90 inches, which can only yield 7 full 12-inch sections (90 ÷ 12 = 7.5). Thus, you can get 7 complete 12-inch sections.
The weight of 1.5-inch plywood can vary depending on the specific type and density of the wood used. On average, 1.5-inch plywood can weigh approximately 3.2-4.8 pounds per square foot.
The weight capacity of 1/2 inch plywood can vary depending on the quality and type of plywood. On average, 1/2 inch plywood can typically support around 40-50 pounds per square foot. It is important to check the specific specifications of the plywood you are using for accurate weight capacity information.
4 sheets approximately 24 inches by 48 inches can be made from a 4 foot by 8 foot piece of plywood. The reason it is approximate is the kerf of the saw blade takes up about 1/16 of an inch.
when asking this question you first need to take into account that plywood comes in different thicknesses therefore weight per particualr thickness of sheet plywood will vary-- in my opinion/ without fact and research / a sheet of 1/2 inch plywood may way about 16 lbs. while a 3/4 inch plywood sheet may way 70 lbs.
The amount of weight a half-inch sheet of plywood can hold will depend on the grade and type of plywood, as well as the size of the sheet and how the weight is distributed. As a general guideline, a half-inch sheet of plywood can typically hold between 40-60 pounds per square foot when evenly distributed.
The load capacity of 1/2 inch plywood is typically around 40-50 pounds per square foot.
The weight capacity of 1/2 inch plywood is typically around 40-50 pounds per square foot.
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
The recommended thickness of plywood for a roof, especially when using 1/2 inch plywood, is typically 5/8 inch or 3/4 inch.
The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.