answersLogoWhite

0

29 of them. If you get 32, you won't have to cut any.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Geometry

How many square feet in 8x4 feet?

8-ft x 4-ft = 32 square feet


How many 8x4 pavers in 450 square feet?

To determine how many 8x4 pavers are needed for 450 square feet, first calculate the area of one paver. An 8x4 paver has an area of 32 square inches (8 inches x 4 inches), which is equivalent to 0.2222 square feet (32 square inches ÷ 144 square inches per square foot). Next, divide 450 square feet by the area of one paver: 450 ÷ 0.2222 ≈ 2025. Therefore, approximately 2025 pavers are needed for 450 square feet.


Will a 8x4 beam support a 16 foot floor span?

Whether an 8x4 beam can support a 16-foot floor span depends on the load it will carry and the type of material used. Typically, an 8x4 (which I assume refers to an 8-inch by 4-inch beam) may not adequately support a 16-foot span for standard residential loads without additional support, such as posts or a different beam size. It's crucial to consult local building codes and a structural engineer for precise calculations and recommendations based on the specific application.


How many square metres on a 8x4 plasterboard?

2.973 sq. meters 1 foot = 30.48 cm 1 sq. foot = .0929 sq. meter 8 x 4 = 32 sq.ft. 32 sq ft = 2.973 sq. meter


How do you find a perimeter of a square with side length of 8 cm?

a square's sides are all the same, and a square has 4 sides. the perimiter is the distance from one corner right around the shape's edge back to where you started. so imagine 4 sides on a square that are all 8cm. add up all the side lengths (8+8+8+8) and that's the perimiter. 8+8+8+8 = 32 Alternatively, a quicker way could be to just times 8 by 4 8x4=32 hope that helps :)

Related Questions

How many 8x4 sheets of ply wood do you need to cover 26m2?

To determine how many 8x4 sheets of plywood are needed to cover 26 m², first, calculate the area of one sheet. An 8x4 sheet measures 32 square feet, which is approximately 2.97 m². Dividing 26 m² by 2.97 m² per sheet gives about 8.75 sheets. Therefore, you would need 9 sheets of plywood to cover the area.


How many 8x4 sheets to cover 37m2?

To determine how many 8x4 sheets are needed to cover 37 m², first calculate the area of one sheet. An 8x4 sheet has an area of 32 square feet, which is approximately 2.97 m². Dividing 37 m² by 2.97 m² per sheet gives about 12.45 sheets. Therefore, you would need 13 sheets to cover the area, as you can't use a fraction of a sheet.


How many 8x4 bricks to cover 100sqft?

450 bricks.


How many ply wood sheets to use if they are 16 inches long and 16 inches wide to cover a 8X4 wall?

Eighteen... 8 feet by 4 feet is 32 ft2. 32 x 144 is 4608 in2. 16 x 16 - 256... 4608 divided by 256 is 18 exactly.


How many 8x4 sheets can be securely transported on the roof rack of your vehicle?

The number of 8x4 sheets that can be securely transported on the roof rack of your vehicle depends on the size and weight capacity of the rack. It is recommended to consult the manufacturer's guidelines or a professional for specific advice on safe transportation.


How many sheets of plywood cover 1008 square feet?

If you are using 8 feet x 4 feet sheets then you would need 1008/(8x4) = 1008/32 which is 504/16 = 252/8 = 126/4 = 63/2 = 31 and 1/2 sheets which rounded to the next whole sheet would be 32 sheets


How many 8x4 blocks will you need to cover 124 sq feet?

First you need to tell us what the units of your 8x4 blocks are. For example, feet, or inches.


8x4 equals how many square meters?

32


How many square meters in 8x4 sheet?

The answer depends on the units used for 8x4.


How many 8x4 pavers does it take to cover 360 square feet?

4.5 pavers will cover 1 sq foot. So 4.5 x 360 =1620 pavers


How much sq ft does a 8X4 drywall sheet cover?

32


How can a table saw be effectively used for cutting 8x4 sheets?

To effectively use a table saw for cutting 8x4 sheets, ensure the saw blade is set to the appropriate height and angle for the desired cut. Use a stable work surface and guide the sheet through the saw with steady pressure and control. Always wear appropriate safety gear and follow all manufacturer instructions for safe operation.