0
What else can I help you with?
How many square feet in a 12x16foot shed?
You have to multiply the two dimensions to get the area. In this case the answer will be 192 square feet in the shed.
How many square feet in a 8.5x11.5 shed?
You have to multiply the two dimensions to get the area. In this case the answer will be 97.75 square feet.
How many square feet is a 36 X 54 foot shed?
1944 feet squared
How many square feet is a 6X8 storage shed?
The answer depends on the units used for the measurements given in the question: feet, yards, metres, ...
A shed 25 feet long by 15 feet wide is that bigger than 25 square meters?
Yes. The area of that shed is 34.8386 m².
How many square feet in a 12x16foot shed?
You have to multiply the two dimensions to get the area. In this case the answer will be 192 square feet in the shed.
How many square feet in a 8.5x11.5 shed?
You have to multiply the two dimensions to get the area. In this case the answer will be 97.75 square feet.
How many square feet is a 36 X 54 foot shed?
1944 feet squared
What is the square footage of a 14 foot square shed?
The shed covers 196 square feet of ground, and the area of its ceiling is also 196 square feet. The area of each wall is (14 x height of the shed).
How many square feet is a 6X8 storage shed?
The answer depends on the units used for the measurements given in the question: feet, yards, metres, ...
A shed 25 feet long by 15 feet wide is that bigger than 25 square meters?
Yes. The area of that shed is 34.8386 m².
Mr. Chambliss is planning to build a shed with a rectangle floor. In his original plan the length of the floor was 7 feet and the area of the floor was 35 square feet. in his new plan he wants to exte?
If the full question wasMr. Chambliss is planning to build a shed with a rectangular floor. In his original plan, the length of the floor was 7 feet and the area of the floor was 35 square feet. In his new plan, he wants to extend the length by 3 more feet. If the total area of the shed will be 70 square feet, by how many feet will he have to extend the width?then the answer is 2 feet.
If you have to lay a floor for a 14 foot square shed the area is ----square feet?
well its 38
How many sheets of 4x8 plywood needed for 8x10 shed?
To build an 8x10 shed using 4x8 plywood sheets, you will need to calculate the total area of the shed's walls and roof. The walls typically require about 320 square feet of plywood (for four walls), and the roof requires around 80 square feet. This totals approximately 400 square feet, which can be covered by 50 sheets of 4x8 plywood, as each sheet covers 32 square feet. Thus, you would need around 13 sheets, considering some waste and cuts.
What is the square feet of a 8x12 shed?
For area measurements, you multiply the length by the width. Here the calculation gives you an answer of 96 square feet.
How many square feet in a 16 x 20 shed?
The answer depends on the units used for 20 x 10. It should be blindingly obvious to anybody that the answer for 20 feet x 10 feet and 20 metres x 10 metres, for example, will be very different.
I have a 16 foot long 9 foot wide and 8 foot high shed how much cladding do I need to cover the whole outside What is the square meter of this space?
To calculate the total square meters of the outside surface area of your shed, you need to find the area of each side and then add them together. Let's break it down: The shed has four walls: Two walls measuring 16 feet long by 8 feet high (front and back) Two walls measuring 9 feet wide by 8 feet high (sides) Calculate the area of each wall: Front and back walls: 16 feet long * 8 feet high = 128 square feet each Side walls: 9 feet wide * 8 feet high = 72 square feet each Add up the areas of all four walls: Total area for front and back walls: 2 * 128 square feet = 256 square feet Total area for side walls: 2 * 72 square feet = 144 square feet Add the areas of all walls together to get the total surface area: Total surface area = 256 square feet + 144 square feet = 400 square feet Now, to convert square feet to square meters, you can use the conversion factor: 1 square meter = 10.764 square feet. So, to find the area in square meters: 400 square feet * (1 square meter / 10.764 square feet) ≈ 37.16 square meters Therefore, the total outside surface area of your shed is approximately 37.16 square meters. Now, to determine how much cladding you need, it depends on the type of cladding and its dimensions. You would need to calculate the area covered by each piece of cladding and then divide the total surface area of the shed by the area covered by one piece of cladding. This will give you the number of pieces needed.
