Wiki User
โ 7y agoIf the full question was
then the answer is 2 feet.
Wiki User
โ 7y agoThe length of a rectangle is typically considered to be the longer of the two sides, also referred to as the longer dimension. It is measured along the longer side of the rectangle from one end to the other.
Let the width be x feet. Then, the length would be (x+7) feet. Given that decreasing the length by 3 feet and increasing the width by 2 feet gives a perimeter of 32 feet, you can set up the equation 2( (x+7) - 3 + x + 2) = 32 to find the original width x and length (x+7).
You would use square centimeters (cm^2) to measure the area of a rectangle that is 34cm in length.
Area = 12 x 10 = 120 Sq feetAnswerArea = length x height. So, 10 x 12 = 120 square feet. AnswerWe know that the area of a rectangle is (length * width). Given: Length of the rectangle is 10 feet and the width is 12 feet.Therefore, the area of the rectangle = (10*12)The area of the rectangle is 120 square feet.12*10 = 120 square feet
The width of the rectangle can be calculated by dividing the area by the length. In this case, the width would be 100 feet (300 sq ft รท 3 ft).
It was an acher
The length of the rectangle is 18cm. The width of the rectangle is 9cm.
The length of a rectangle is typically considered to be the longer of the two sides, also referred to as the longer dimension. It is measured along the longer side of the rectangle from one end to the other.
if the length is 36 on a rectangle then what is the width of the rectangle
When you cut out a square from a rectangle shape you will not have the original proportion. A square has four equal side a rectangle has four side that are not equal.
The width and length of a rectangle are two of its main dimensions. The width is the measurement of the shorter side of the rectangle, while the length is the measurement of the longer side. The area of a rectangle is calculated by multiplying the width by the length.
You wind up with 6 times the original area.
This length (diagonal) = sq.rt ( l2 + b2 ) where 'l' is length of the rectangle and 'b' is the breadth of the rectangle.
A = lw Area of a rectangle = length times width
width=9 length=18
The perimeter of a rectangle is not sufficient to determine its length.
Divide the area by the length of the rectangle