A cord of wood is generally 8 feet long, 4 feet tall, and 4 feet wide. The wood is cut into 16 inch lengths. The amount of wood in the cord varies depending on the type of wood but the wood must occupy a space of 128 square feet.
A "cord" is a unit of measure for firewood. It is a stack of wood that is 4'x4'x8'. That is 128 cubic feet of wood.
One square meter of wood flooring is measured by three feet in a meter and one square yard is 9 square feet. To make it easier just figure 10. It's easier to take the product back than to run out. Sometimes when you run out the store runs out as well.
Depending on the poly, the wood as well as the condition and the age of the wood, figure a minimum of 300 - 500 square feet per gallon. If the floor is very old or dry, it will be closer to the 300. If the wood is in good condition and reasonably new, 500 is a reasonable assumption. Also, with each coat you put on, the poly will last longer once a foundation coat is established.
The cost to install 650 square feet of wood floor depends on the wood chosen and who you choose to install it. The flooring itself can range from $1.80 to $15 per square foot, while labor can be anywhere from $2 to 8 per square foot.
A cord of wood is generally 8 feet long, 4 feet tall, and 4 feet wide. The wood is cut into 16 inch lengths. The amount of wood in the cord varies depending on the type of wood but the wood must occupy a space of 128 square feet.
64 cu.ft
Square feet and a cord of wood are different types of measurement: square feet is length x width; a cord of wood is volume - length x width x height. A cord is the amount of wood is 128 cubic feet, or 4 feet wide, 4 feet high, and 8 feet long.
37.5 square feet.
a cord of wood is equal to 128 cubic feet of neatly stacked wood.
One cord of wood has to be stacked to measure. The dementions are 4 feet high by 4 feet wide by 8 feet long.
If you assume the cord of wood formed a perfect rectangular prism you would simply multiply the length*width*height to get 128 cubic feet. However, it is obvious that unless the wood is cut into square pieces such as 6"x6" or 4"x4", there will be lots of air space inside your cord. But the basic answer is as above. Hope that helps answer this rather odd question. I disagree that it is an odd question. it is a very good question. Buyers of firewood should be aware of the cubic feet because many sellers sell variations on the cord, and a smart buyer will be able to figure out all the cubic feet variations and know whether he is being shorted by the seller.
It depends on the density of the wood as it can range from 170 to 1370 kg/cubic metre. At a total guess I would say less than 1 cubic feet.
A full cord of wood is a stack that measures 4 feet high, 4 feet wide, and 8 feet long, totaling 128 cubic feet of wood. A face cord is a stack that is 4 feet high and 8 feet long, but the width can vary depending on the length of the wood pieces, typically smaller than a full cord.
A cord is a stack of wood that is 4 feet high, 4 feet wide, and 8 feet long. That would be a very large tree.
Living room 16 feet long by 11 feet wide. How many square feet of wood tile do i need?
A "cord" is a unit of measure for firewood. It is a stack of wood that is 4'x4'x8'. That is 128 cubic feet of wood.