300 mm = 0.300 meters and 450 mm = 0.450 meters. Therefore, the area of each tile in square meters is 0.300 X 0.450 = 0.135 square meters. Therefore, the smallest number of tiles that can cover an area of 13 square meters is 13/0.135 or at least 97 tiles.
To determine how many 60x60 cm tiles are needed to cover 42 square meters, first convert the tile size to square meters. Each 60x60 cm tile covers 0.36 square meters (0.6m x 0.6m). Dividing 42 square meters by 0.36 square meters per tile gives approximately 116.67. Therefore, you would need 117 tiles to cover 42 square meters, rounding up since you can’t have a fraction of a tile.
3 and 1/3 Multiply 2 by 5 to find the area of the space, which is 10 square meters. Divide 10 by 3 to get 3 and 1/3.
35.
You would need 137 (136.23) 16" x 16" tiles to cover 22.5 square meters.
To find the total area of the floor, you would multiply the length by the width. In this case, 8.4m x 10m = 84 square meters. Therefore, you would need 84 square meters to cover a floor that measures 8.4m by 10m.
305.56
Well, isn't that a happy little question! To cover 37 square meters with 450mm x 450mm paving slabs, you would need approximately 925 slabs. It's like painting a beautiful landscape, each slab fitting perfectly to create a lovely, harmonious surface. Just remember to take your time and enjoy the process!
20 ft= 6096 mm (6096 * 6096) / (450 * 450) = 183.512178 184 slabs
0.6 x 0.3 = 0.18 square metres 5/0.18 = 27.78 tiles, or 28 if being practical
To determine how many 450mm x 450mm slabs are needed to cover a 5ft x 4ft area, first convert the dimensions to millimeters: 5ft is approximately 1524mm and 4ft is approximately 1219mm. The area of the space is 1524mm x 1219mm = 1,860,756 mm². Each slab covers an area of 450mm x 450mm = 202,500 mm². Dividing the total area by the area of one slab gives you approximately 9.2, so you will need 10 slabs to cover the area completely.
To find out how many 600mm x 300mm tiles are needed for 60m², first convert the tile dimensions to square meters: 600mm x 300mm = 0.6m x 0.3m = 0.18m² per tile. Next, divide the total area by the area of one tile: 60m² ÷ 0.18m² = approximately 333.33. Therefore, you would need about 334 tiles to cover 60m², accounting for any breakage or cuts.
14 m² (square meters) is a unit of area measurement that represents a space measuring 14 square meters. This could describe a room, a piece of land, or any two-dimensional space. For example, a square with each side measuring approximately 3.74 meters would cover an area of 14 m².
To calculate the number of paving slabs needed for one square meter, first determine the area of one slab. A slab measuring 600mm x 300mm has an area of 0.6m x 0.3m = 0.18 square meters. Therefore, to cover one square meter, you would need approximately 1 / 0.18 = 5.56 slabs. Rounding up, you would need 6 slabs to cover one square meter.
yes the area is 30 meters2 and the carpet is 5x5 meters which is 25 meters2 so it CAN fit. But I warn you, it will not be able to cover the whole floor.
It depends on the shape of the 40m2. If it is 1m x 40m then, despite the area being 40m2, there is not a single 450mm x 450mm in it. The shape is simply not wide enough. But if you're allowed to cut up the slabs to make them fit, then you need 198 of them in order to cover 40 m2 of area.
If a single roll of wallpaper will cover three square meters it will take 3.1 rolls to cover a wall that is 2 meters x 5 meters. You will need 10 square meters of paper to cover this size wall.
It can cover 8 square metres or 86 square feet or 9.567 square yards.