14
400 at least
Each slab is .5 x .5 = .25 square m. Yard is 8x 5 = 40 square m so you need 40/.25 = 160 slabs
The answer will vary slightly depending on assumptions: will the slabs have a space between them, and will you be cutting the slabs to fill fractions. 21 feet is equal to 14.2 of the 450 mm slabs. 19 feet is equal to 12.9 of the slabs. To complete the rectangular area, 14.2 x 12.9 = 183 slabs.
first lets convert m to mm.we know, 1 m=1000 mm. 5 m =5000 mm and 8m=8000mm. Now, no.of paving slab = area of flags /area of slab . =5000 X8000/450 x 450. =197.5 = 197 slabs.
14
400 at least
305.56
You will need 63 44cm x 44cm slabs to cover that area.
If most of the off-cuts are also used then you will need 315 slabs. Otherwise you will need a lot more.
Depends on the linear dimensions of both the slabs and the ground.
You would need a total of 160
Joe needs 460 paving slabs to surrond the pond.
Each slab is .5 x .5 = .25 square m. Yard is 8x 5 = 40 square m so you need 40/.25 = 160 slabs
The answer will vary slightly depending on assumptions: will the slabs have a space between them, and will you be cutting the slabs to fill fractions. 21 feet is equal to 14.2 of the 450 mm slabs. 19 feet is equal to 12.9 of the slabs. To complete the rectangular area, 14.2 x 12.9 = 183 slabs.
Well, isn't that a happy little question! To cover 55 square meters with 600mm x 600mm slabs, you would need around 192 slabs. It's like painting a beautiful landscape - just measure twice and lay those slabs down gently, and you'll have a lovely space to enjoy!
A square slab measuring 0.6 metres all round has an area of 0.36 square metres. This means that to cover an area of 24 square metres you will need 66 slabs and 2/3 of a slab. Covering the area may be problematic if 1/3 of a slab and 2/3 of a slab become involved, of lesser fractions, depending on the exact length and width which gave the area of 24 - and if there is a pattern to maintain.