Surface area of a cube = side * side * 6
SA = s*s*6
With the SA = 54, we get
54 / 6 = s*s
9 = s* s
s = square root of 9 = 3
Volume of a cube = s * s * s
3 cubed = 27
27 Cubic inches
The volume of that prism would be 224 square inches. To calculate this you do:Multiply base times height (width in your case), this equattion is 7x8=56. Now you have your areaNext multiply the area (which was 56 square inches) by the depth (4 square inches). 56x4=224. Your volume is now 224 square inches (or inches squared)
The depth would have to have a value of 1. For example, a slab 60" long by 24" wide by 1" deep would have the same surface area as volume. Examples: Area = LxW (60x24=1440 sq inches). Volume = LXWXD (60x24x1=1440 cubic inches). In this case, the volume has the same value as the surface area
The area would be 81 square inches.
Note that "11 inches squared" means 11 x 11 or 121 square inches. 11 square inches would be 70.97 square centimeters (1 square inch = 6.4516 square centimeters) 121 square inches would be 780.64 square centimeters.
Each face of the cube would have an area of 4*4 = 16 sq inches. A cube has 6 faces so the total surface area = 6*16 = 96 sq inches.
Surface area would be measured in square inches or square feet. This is the area of a flat surface, like a desk top. Volume is the inside area, like inside a balloon. This would be measured in cubic inches or feet (inches x inches x inches).
734... jk JK JK JK
square inches
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
The volume of that prism would be 224 square inches. To calculate this you do:Multiply base times height (width in your case), this equattion is 7x8=56. Now you have your areaNext multiply the area (which was 56 square inches) by the depth (4 square inches). 56x4=224. Your volume is now 224 square inches (or inches squared)
The volume would be: 2.828 cubic feet.
Area of base is 14 x 14 = 196 square inches and since volume is 1568, the height would be (1568/196) = 8 inches
To convert inches of water column to volume, you would need to know the area over which the water column is acting. Once you have the area, you can calculate the volume by multiplying the inches of water column by the area in square inches. The formula would be: Volume = Inches of water column * Area.
To calculate the appropriate size of a rubbermaid tub, you need to consider the volume rather than just the surface area. However, if you assume a standard height of 5 inches, the equivalent rubbermaid tub to 88 square inches in surface area would be approximately a 24-gallon tub.
A square is two dimentional and has an area (side X side = # of square inches) A square has no volume unless it is three dimentional, in which case, it would be a cube and not a square.
The depth would have to have a value of 1. For example, a slab 60" long by 24" wide by 1" deep would have the same surface area as volume. Examples: Area = LxW (60x24=1440 sq inches). Volume = LXWXD (60x24x1=1440 cubic inches). In this case, the volume has the same value as the surface area
We would have to know the length of the tube.