You can do it whichever way is more convenient for you.
The answer is the same either way.
it is lxwxh (width x hight)
The x-axis comes first. because x comes before y.
width
It doesn't matter but Length * Width * Height is usually how people say it :D
First you find the area of the base which is a pentagon. Then you multiply it by the height. So base times height equals volume.
it is lxwxh (width x hight)
They can come in any order.
width always comes first
length
Well I think it depends on the type of fence : The first translation which comes to my mind is "clôture", it's the wire type fence. If it's in wood it's then a "palissade".
Length comes first in measure quadrilaterals.
Width by height.A standard sheet of typing or copy paper is 8-1/2" by 11"....eight and one half inches wide and eleven inches high. A sheet of legal paper is 8-1/2" by 14".The world standard of DIN A 4 paper is:Width = 21.0 centimeters by height = 29.7 centimeters.
First, you must know the length, the width and the height. Then you multiply all of them and you get the capacity.
In the 6th Century B.C "Thales" was first introduced the shadow by measuring the height of the pyramid at Giza.
First you need the specification for this height. Then take a tape measure and a flat floor and measure from the floor to the specified point on the car.
If someone has built a fence on your property, the first thing that you need to do is to send them a letter informing them of it and requesting that they remove the fence. If they do not respond, then you will have to hire an attorney to make them move it. It will require that a surveyor comes out and verifies who is right and who is wrong.
A privacy fence is usually quite costly. To figure out how much, first calculate how many feet of fence that will be needed.Then, decide between a wood fence or a vinyl one. Calculate how many posts you will need, knowing you need a post for about every six feet. Then calculate how nails you will need. About three per board. And finally choose your fence height.