0.750 inch
The number of Y16 rebar pieces in one ton depends on the length of each rebar. Y16 rebar has a nominal diameter of 16 mm and weighs approximately 1.58 kg per meter. Therefore, in a ton (1,000 kg), there would be around 632 meters of Y16 rebar, which translates to about 63 pieces if each rebar is 12 meters long. For different lengths, the number of pieces will vary accordingly.
If the diameter is what you are talking about that is 6 cm, you must divide that number by two to find the radius because the radius is half a diameter. The radius of a circle with a diameter of 6 cm. would be 3 cm.
Most rebar (steel reinforcement bar) is approximately round. Measure the diameter of the bar, that is, the thickness of the bar. Divide the measurement by 2 to get the radius. Use the formula pi x r2 (3.14 x radius x radius) to get the cross sectional area. The formula works for all measurement units whether they are inches, millimeters, centimeters or others. An alternative is to use (pi x d^2)/4. (3.14x diameter x diameter divided by 4) You do not then need to divide the original diameter.
12 is the diameter if the radius is 6
As the diameter of a circle is twice the radius, a circle with a 6-foot radius would have a diameter of 6 x 2 or 12 feet.
diameter 16
The diameter of the bar. #6 is 1/8" larger than the #5.
The unit of measurement for rebar thickness, such as 14mm, is in millimeters (mm). This measurement refers to the diameter of the rebar.
The number of Y16 rebar pieces in one ton depends on the length of each rebar. Y16 rebar has a nominal diameter of 16 mm and weighs approximately 1.58 kg per meter. Therefore, in a ton (1,000 kg), there would be around 632 meters of Y16 rebar, which translates to about 63 pieces if each rebar is 12 meters long. For different lengths, the number of pieces will vary accordingly.
3/8" in diameter.
The weight of 5 rebar rods can vary depending on the diameter and length of the rebar. As a general estimate, a standard size #5 rebar (5/8-inch diameter) that is 20 feet long weighs around 15.41 pounds. Therefore, the weight of 5 such rebar rods would be approximately 77.05 pounds.
In steel rebar weight calculation, the number 162 refers to a common formula used to estimate the weight of rebar in pounds per foot. Specifically, the weight (in pounds) of a rebar can be calculated using the formula: Weight (lb/ft) = (Diameter in inches)^2 x 162. For example, a #5 rebar (which has a diameter of 0.625 inches) would weigh approximately 1.43 pounds per foot, calculated as (0.625^2) x 162.
The weight of rebar can be calculated using the formula: weight = (diameter^2 * length * 0.006165) kg, where the diameter is in mm and length is in meters. Substituting the given values, the weight of the rebar would be approximately 22.98 kg.
Unit weight of 36mm rebar is 7.99 kg per meter
The standard size for a number 6 screw diameter is 0.138 inches.
The weight per meter of a 20mm diameter rebar is approximately 2.47 kilograms.
Multiply the diameter by the number pi - approximately 3.14.Multiply the diameter by the number pi - approximately 3.14.Multiply the diameter by the number pi - approximately 3.14.Multiply the diameter by the number pi - approximately 3.14.