0
What else can I help you with?
How much grout does it take to fill a 8 x 8 x 16 block?
1yrd of grout will fill 100 block with typical 32" on center vertical rebar and 48" horizontal rebar.
If the radius of a circle is 8 feet what is the diameter?
Diameter is 16. The radius is half its diameter
What is the diameter of a circle whose radius is 8 cm?
Diameter = Radius * 2 In this case, radius = 8 cm so diameter = 16 cm
If the circumference is 8 inches what is the diameter?
If the circumference is 8 inches the diameter is: 2.546 inches. (D = c divided by Pi)
What would be a radius of a circle with a diameter of 8 inches?
Radius = 1/2 diameter = 1/2 (8) = 4 inches.
What is the Nominal size of 8 rebar?
Nominal size is 1.00". Actual is 1.1.25" (includes deformation ribbing).
How thick is 3 rebar?
3/8" in diameter.
What is the weight of 5 rebar?
The weight of 5 rebar rods can vary depending on the diameter and length of the rebar. As a general estimate, a standard size #5 rebar (5/8-inch diameter) that is 20 feet long weighs around 15.41 pounds. Therefore, the weight of 5 such rebar rods would be approximately 77.05 pounds.
What is the diameter of an 8 inch pipe?
The inside diameter (ID) is 8 inches. The nominal pipe size (NPS) and outside diameter (OD) depend on the thickness of the walls of the pipe.
What is the difference between 5 and 6 rebar?
The diameter of the bar. #6 is 1/8" larger than the #5.
What is inside diameter of 8 clay pipe?
Diameter of clay sewer pipe are dependent on the manufacturer and the nominal diameter of the pipe (generally ranging from 4" to 30"). For one manufacturer's specifications see: http://www.loganclaypipe.com/pp_pipespecsdata.html
How long is M8x50 bolt?
An M8x50 bolt is 50 millimeters long and has a diameter of 8 millimeters. The "M" designation indicates that it is a metric bolt, with the number following it representing the nominal diameter in millimeters. In this case, the length of the bolt is specifically 50 mm.
How much rebar for 20 x 60 x 8 inch slab?
To determine the amount of rebar needed for a 20 x 60 x 8 inch slab, you first need to calculate the perimeter and then the spacing of the rebar. For a typical slab, rebar is usually placed at 12 to 18 inches apart in each direction. Assuming you use #4 rebar (0.5 inches in diameter) spaced at 16 inches on center, you would need approximately 8 pieces of rebar along the 20-inch side and 5 pieces along the 60-inch side, totaling around 13 lengths of rebar, considering overlaps and cut-offs. Always consult local building codes and structural engineers to confirm specific rebar requirements for your project.
How much does 8 mm rebar in kg?
8mm rebar weighs 0.395kg/m
What is the standard size for a number 8 screw diameter?
The standard size for a number 8 screw diameter is 0.164 inches.
What is outer diameter of an 832 bolt?
An 832 bolt refers to a bolt with a nominal diameter of 8/32 inches, which is equivalent to 1/4 inch or 0.25 inches. Therefore, its outer diameter is approximately 0.25 inches. Additionally, the "8" indicates the bolt's thread count per inch, meaning it has 8 threads per inch.
What is the size of a number 8 screw?
A number 8 screw has a diameter of approximately 0.164 inches.
