(5.4*2.6)^0.5 = 3.75mm
The area of each square within the rectangle is 49 cm2, which is the area of a 7 cm x 7 cm square. There the length of the rectangle is 21 cm and its breadth is 7 cm.
If the perimeter of a square is 80' then each side must be 20' in length. (4 x 20 = 80) The area of a rectangle is obtained by multiplying the length by the width. A square is a rectangle with all four sides of equal length therefore the area is two lengths multiplied together. 20 x 20 = 400 sq ft is thus the area of the square.
For a start at this question, find out how wide this rectangle must be. area (250) = length (25) x width (???) The area of a rectangle is its length times its width. We should divide the area by the length (25) to get the width. The answer is 10. Then we know that each long side is 25 and each short side is 10. We know that in a rectangle, the long sides are the same length and the short sides are the same width. In order to get the perimeter, we add 25 and 25 and 10 and 10. We get 70. So the perimeter is 70.
Invalid conversion: square inches is a measure of area and inches is a measure of length or distance.If each side of a square is 10 inches long, the area of the square will be 100 square inches. (10*10=100)For any rectangle with an area of 100 square inches, the length of the short side times the length of the long side must total 100.(For instance, a rectangle 4 inches by 25 inches: 4*25=100)
If it's a square, 9 by 9 feet. If it's a rectangle, any 2 numbers that multiply to make 81.
The area of a square is calculated the same as that of a rectangle: length x width.
The area of each square within the rectangle is 49 cm2, which is the area of a 7 cm x 7 cm square. There the length of the rectangle is 21 cm and its breadth is 7 cm.
If the perimeter of a square is 80' then each side must be 20' in length. (4 x 20 = 80) The area of a rectangle is obtained by multiplying the length by the width. A square is a rectangle with all four sides of equal length therefore the area is two lengths multiplied together. 20 x 20 = 400 sq ft is thus the area of the square.
A rectangle with one side that is double the length of the other side can be seen as two squares beside each other, that are half the area of the original rectangle, in this case 18 square inches / 2 = 9 square inches. The side of a square is the square root of the area, in this case the square root of 9 square inches, which is 3 inches. Now think about the rectangle again. What we just counted was the side of a square that made up one half of the rectangle you wanted to calculate the area of. So the shorter side of the rectangle is the same as our square, and the longer side is double the length. So the width of the rectangle is 3 inches, and the length is 2 * 3 inches = 6 inches. Or: Area = length x width (A=lw) Area = 18 (in2) Width = w Length = twice width (2w) 18 = (2w)w 18 = 2w2 9 = w2 3 = w The width is 3 in., the length (2w) is 6 in.
24 feet square feet
All 4 sides of a square have equal length. If the perimeter is 28 ft, then the length of each side is 7 ft. In any rectangle, the area is (length) times (width). In the square, (length) times (width) is the same as (side squared). 72 = 49 square feet.
In square each arm's length is equal. If we indicate each arm's length by 'a'. Then area of square =(a)2
The length of each side of a square with an area of 64 is: 8.
First answer: Yes, a rectangle can be a square if all it's sides are the same length. The definition of a rectangle is "a four sided figure where opposite sides are the same length. If all sides are 4 inches, then opposite sides will be equal.Second answer:~Yes, a rectangle can be a square. ~The definition of a rectangle: a parallelogram with four sides, the sides are parallel to each other, the sides parallel to each other are the same length, there are 4 right anglesDifference between a square and a rectangle: all of the sides are the same length in a squareConclusion: a square is always a rectangle but a rectangle isn't always a square.
It's impossible. The largest area for a rectangle with perimeter of 6 is 2.25, a perfect square with a length of 1.5 for each side. Any other combination yields a smaller area.
Because we are measuring a square, we know that all four sides are equal in length. Therefore each side has an equal length of 42ft, or else by definition it would not be a square, but a rectangle. To measure the area of said square me simply multiply its length by its height. 42 x 42 = 1764
For a start at this question, find out how wide this rectangle must be. area (250) = length (25) x width (???) The area of a rectangle is its length times its width. We should divide the area by the length (25) to get the width. The answer is 10. Then we know that each long side is 25 and each short side is 10. We know that in a rectangle, the long sides are the same length and the short sides are the same width. In order to get the perimeter, we add 25 and 25 and 10 and 10. We get 70. So the perimeter is 70.