0
Add your answer:
Earn +20 pts
Where is 0.31 inch on a ruler?
.31 inches to the right
A point on a 12-inch ruler that divides the ruler into a golden ratio would be a point?
At a measure of approx 7.4164 inches.
Where is 6.1 inches found on a ruler?
Just after the mark for 6 inches.
Where is 7mm on a ruler in inches?
25.4mm equals 1 inch so... 7 mm is 9/32 of an inch Direct Conversion Formula 7 mm* 1 in 25.4 mm = 0.2755905512 in
Where is 1.72 inches on ruler?
It is between the marks for 1 inch and 2 inches: approximately three times as far from 1 as it is from 2.
Where On a ruler where would five eights of an inch be?
Five eighths of an inch on a ruler would be located between the half-inch mark and the three-quarter inch mark.
How long is 1.18in on a ruler?
1.18 inches on a ruler would be slightly more than an inch. You would typically measure it between the 1-inch mark and the 2-inch mark on a standard ruler.
How much is 0.83 on a ruler?
0.83 on a ruler would typically be between the 3/4 inch mark and the 7/8 inch mark.
What does 0.66 equal to on a ruler?
0.66 on a ruler represents 0.66 inches or 66 hundredths of an inch. It would fall between the 5/8 inch mark and the 11/16 inch mark on a standard ruler.
Where is the 1.8th inch mark on the ruler?
4.6 centimeters
where is 1.18 inches on a ruler?
1.18 inches on a ruler would be located between the 1 inch and 2 inch markings on the ruler. It would be slightly closer to the 1 inch mark than the 2 inch mark. Keep in mind that most rulers are divided into 16 equal parts per inch, with each tick mark representing 1/16 of an inch. So, on a standard ruler, the 1.18 inches mark would be located slightly beyond the 18/16 (1.125) mark and slightly before the 19/16 (1.1875) mark.
Where is 5.9 inches on ruler?
between 5 3/4 and 6 inch marks almost to the 6 inch mark, but not quite
Where on ruler is 2.2 inches?
It is 2/10 past the one inch mark on a ruler.
Where is 3.75 inches on a ruler?
It is three quarters of the way from the 3 inch mark towards the 4 inch mark. Imperial rulers are normally marked in 16th of an inch with the 4th and 12th marks slightly longer and the 8th even longer. The 4th mark is ¼, the 8th mark is ½ and the 12th mark is ¾; 3.75 inches is 3¾ inches so on such a ruler it is the 12th mark to the right of the 3, and will be slightly longer than the 3 marks either side of it.
Show you 2.16 inch in a ruler?
Oh, isn't that just a happy little measurement! If you look at a ruler, you'll see that 2.16 inches is just a bit past the 2-inch mark and a little before the 3-inch mark. Just imagine all the wonderful things you can create with that length - maybe a tiny tree or a little stream in your painting. Just let your imagination flow and have fun with it!
Could you show 11.375 on a ruler?
On a standard ruler, 11.375 inches would fall between the 11-inch mark and the 12-inch mark. You would need to estimate the position between the two marks to indicate 11.375 inches.
What does .35 inch look like on a ruler?
On a standard ruler, .35 inches would be located between the 1/4 inch mark and the 3/8 inch mark. It would be closer to the 1/4 inch mark, but not quite reaching the 3/8 inch mark. .35 inches is equivalent to 9 millimeters, so it would be slightly less than halfway between the 1/4 inch and 3/8 inch marks on the ruler.
