The weight capacity of 1/2 inch plywood can vary depending on the quality and type of plywood. On average, 1/2 inch plywood can typically support around 40-50 pounds per square foot. It is important to check the specific specifications of the plywood you are using for accurate weight capacity information.
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
when asking this question you first need to take into account that plywood comes in different thicknesses therefore weight per particualr thickness of sheet plywood will vary-- in my opinion/ without fact and research / a sheet of 1/2 inch plywood may way about 16 lbs. while a 3/4 inch plywood sheet may way 70 lbs.
A 9-foot piece of plywood is 108 inches long. If you want to cut it into 12-inch sections, you can theoretically get 9 sections (108 ÷ 12 = 9). However, each cut removes 18 inches in total, so to make 8 cuts to achieve 9 sections, you need to account for the 18 inches lost. This means you lose 18 inches from the 108 inches, leaving you with 90 inches, which can only yield 7 full 12-inch sections (90 ÷ 12 = 7.5). Thus, you can get 7 complete 12-inch sections.
3.14159 x radius squared x thickness x .283 (weight of 1 cubic inch of steel)
1 foot = 12 inches so 9 ft = 9*12 inches so 9 sections!
100 gr
I need the thickness dimension of 12 ply plywood for floor.
12 inch lund would weight 2 kgs
1848 / 16 =372 / 12 = 66*3=18
60lbs
check his BMI