Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
10 psi.
Multiply inches of WC by 0.0361 to obtain PSI.
.4 psi
You need to multiply by 0.036. So 5 x 0.036=.18 psi
27.71 inches of water column equals 1 psi
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
Multiply by 0.036 http://www.enercongroup.com/conversion_factors.htm One PSI is equal to 27.7 inches of water column
0.25 psig = 413.7 inches of water column
You need to know how high the water column is to calculate the pressure it exerts at its base! For example, a column of water 1 metre deep would exert a pressure of 9.81 kPa at its base (density x gravity x depth - 1000 * 9.81 * 1). This would be equal to approx 1.42 PSI.
10 psi.
1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.
35 inches of water is equivalent to approximately 1.27 psi. This can be calculated by dividing the height of the water column (35 inches) by the conversion factor (27.71 inches of water column per psi).
5 psi is equivalent to 34.47 inches of water column (in wc).
Head pressure is created by a column (depth) of water in a container. Pipe is considered a container. Diameter is not a factor. The higher the column of water, the more psi it creates. Multiply column height of water by .434 to get psi of water.
One pound per square inch (psi) is equal to approximately 2.31 feet of water. This means that a column of water that is 2.31 feet tall exerts a pressure of 1 psi at its base.
Every 2.3077 feet of water in a column increases the water pressure at the bottom of the column by 1 pound per square inch.A 39 foot column of water with a pressure of 120 psi at the base will have a pressure exerted on its top surface of 103.1 psi.39 ft/ 2.3077 ft/1 psi = 16.9 psi ; 120 psi -16.9 psi = 103.1 psievery meter of water in a column increases the pressure at the base of the column by 0.1 kg./ sq. cm (or 1 kilopascal)A 12 meter column of water exerts a pressure at its base of 12 kPa. (or 1.2 kg/sq. cm)