0
What else can I help you with?
How much pound in a length of half inch steel?
The weight of a half-inch steel rod varies depending on its length and the specific type of steel. However, as a general estimate, a half-inch diameter steel rod weighs approximately 0.491 pounds per foot. To calculate the total weight, multiply the length of the rod in feet by this weight per foot. For example, a 10-foot length would weigh about 4.91 pounds.
How much does a one half inch 4 foot by 8 foot sheet of plate steel weigh?
A half-inch thick sheet of plate steel measuring 4 feet by 8 feet has a volume of 128 cubic feet (4 ft x 8 ft x 0.5 ft). Steel has a density of approximately 490 pounds per cubic foot. Therefore, the weight of the sheet would be about 62,720 pounds (128 cubic feet x 490 pounds/cubic foot).
How much does a 8 feet long 3 inch diameter steel rod weigh?
The weight of a steel rod can be calculated using the formula: weight = volume × density. The volume of a cylinder is given by the formula ( V = \pi r^2 h ), where ( r ) is the radius and ( h ) is the height. For an 8-foot long rod with a 3-inch diameter, the radius is 1.5 inches (0.125 feet). Using the density of steel, which is approximately 490 pounds per cubic foot, the rod weighs about 24.5 pounds.
How much weight will a four inch tall X 2 inch wide with a one quarter section steel tube five foot long supported on both ends hold in the middle without bending?
That depends... on the composition of the steel !
How much inch and feet are in125 inch?
10 feet and 5 inches.
How much pound in a length of half inch steel?
The weight of a half-inch steel rod varies depending on its length and the specific type of steel. However, as a general estimate, a half-inch diameter steel rod weighs approximately 0.491 pounds per foot. To calculate the total weight, multiply the length of the rod in feet by this weight per foot. For example, a 10-foot length would weigh about 4.91 pounds.
How much water weight is there in an area that is 5 feet by 30 feet by 1 inch deep?
Ca. 354 kg
How much weight should you loose if im 5 feet 1 inch tall and weight 206 pounds?
A crapload.
How much does a one half inch 4 foot by 8 foot sheet of plate steel weigh?
A half-inch thick sheet of plate steel measuring 4 feet by 8 feet has a volume of 128 cubic feet (4 ft x 8 ft x 0.5 ft). Steel has a density of approximately 490 pounds per cubic foot. Therefore, the weight of the sheet would be about 62,720 pounds (128 cubic feet x 490 pounds/cubic foot).
How much does a 8 feet long 3 inch diameter steel rod weigh?
The weight of a steel rod can be calculated using the formula: weight = volume × density. The volume of a cylinder is given by the formula ( V = \pi r^2 h ), where ( r ) is the radius and ( h ) is the height. For an 8-foot long rod with a 3-inch diameter, the radius is 1.5 inches (0.125 feet). Using the density of steel, which is approximately 490 pounds per cubic foot, the rod weighs about 24.5 pounds.
How much does 2 inch diameter steel pipe weigh?
You need to specify the wall thickness in order to calculate the weight.
How much weight will a four inch tall X 2 inch wide with a one quarter section steel tube five foot long supported on both ends hold in the middle without bending?
That depends... on the composition of the steel !
How much inch and feet are in125 inch?
10 feet and 5 inches.
How much weight can 12 inch h beam carry 19 feet long?
That rather depends - on what the beam is made of !
How much does a Butcher Paper Roll weight?
That depends on the size of the Butcher Paper Roll. A 12 inch wide, 900 feet long roll one has a roll weight of 12 lbs. If the roll was 18 inch wide and the same length the roll weight is 18 lbs. A 30 inch wide, 1000 feet long has a roll weight of slightly above 30 lbs.
How much is 74.8 inch in feet?
6.2333_ feet
How much should a 4 feet 9 inch 11 year old girl weight?
Well I am four foot eleven and fourteen and I weight 88 pounds.
