Let the length be 2x-6 and the width be x:
(2x-6)*x = 140 square meters
Mutiply out the brackets:
2x2-6x = 140
2x2-6x-140 = 0
Solving the above equation using the quadratic equation formula will result in:
x = -7 or x = 10 so it must be the latter because dimensions can't be negative.
Therefore: length = 14 meters and width = 10 meters
Check: 14*10 = 140 square meters
Rooms are generally rectangular in shape, so the floor space is the length times the width. Add up all the rooms (and corridors or other spaces) and you get the total for the house. If you have spaces that are not rectangular, then the calculations become a bit more complicated, but you can usually estimate a rectangular equivalent.
The answer depends on the shape of the room. If it is rectangular, then it is the product of its length and width - both measured in feet. For any variation - for example, bay windows, alcoves, L-shaped rooms, the determination is less simple.
Then the height is at LEAST 9 meters (3 floors each 3 meters high) You would need to add any height of the foundation and roof- if any.
Discrete. You cannot have 3.76... rooms!
There were 88 rooms shared between the whole castle!
Rooms are generally rectangular in shape, so the floor space is the length times the width. Add up all the rooms (and corridors or other spaces) and you get the total for the house. If you have spaces that are not rectangular, then the calculations become a bit more complicated, but you can usually estimate a rectangular equivalent.
The size of the Inca's house, known as a "kancha," can vary depending on the social status of the individual or family. In general, Inca houses were rectangular and relatively small, typically measuring around 5-7 meters in width and 10-15 meters in length. They were made of stone, adobe, and thatch, and often had one or two rooms.
it is less expensive to build.
You would use the metric unit "meters" to measure the length of a room.
I've always found standard rectangular or square rooms to be boring.I ordered a rectangular cake, you've made it triangular.
"cells."
The answer depends on the shape of the room. If it is rectangular, then it is the product of its length and width - both measured in feet. For any variation - for example, bay windows, alcoves, L-shaped rooms, the determination is less simple.
Some rooms have more, some have less.Here's how to calculate the volume of your own room:-- Measure the length of the room in meters.-- Measure the width of the room in meters.-- Measure the height of the room in meters.-- Calculate the product of all three numbers.-- Multiply the product by 1,000.-- The last number is the room's volume in liters.
The answer depends on the shape of the room. If it is rectangular, then it is the product of its length and width - both measured in feet. For any variation - for example, bay windows, alcoves, L-shaped rooms, the determination is less simple.
Because it's easier to make rectangular measurements that circular ones, and also, it would be pretty hard to make circular furniture, too! Rectangles are just easier to work with.
Not enough information provided.
It was 108 meters long and 120 meters deep and24 meters height. It has 775 rooms (includes 19 state rooms, 52 royal and guest bedrooms, 188 staff bedrooms, 92 office and 78 bathrooms)