C = (30n+295) over (n-5)
Answer: n = (-5C-295) over (30-C)
This question has already been answered along with details on how to work it out.
it equals a hole or 1
There are 100 hundredths in 1 hole. A "hole" typically refers to a whole number, and in decimal terms, 1 hole equals 1.00. Since 100 hundredths make up 1 whole, it follows that 1 hole contains 100 hundredths.
If you dig a hole that is 3 square meters in area and 2 meters deep, the volume of the hole is 3 square meters multiplied by 2 meters, which equals 6 cubic meters. However, since the dirt is removed from the hole, there is no dirt in the hole itself. Therefore, the amount of dirt in your hole is zero.
there should be a little hole on it somewhere the u stick somthing in side of it then you just change it
5/16 hole X 4 inch on a flat bottom hole: This will depend on the material, and tools available. Use a 1/8 bit, then 5/16. If you are not sure how deep the drill bit is in the hole, paint white out on the bit as your 4 inch mark so you can see it while the drill is spinning. If the material is metal, you will need coolant. To get the flat bottom: it wood, put a flat ended bolt into the hole and hammer, it will flatten the hole, it metal, forget about it, the hole is quite flat, and a pain in the butt to change. :-)
Helen G. Hole has written: 'Things civil and useful' -- subject(s): Education, Society of Friends
it equals a hole or 1
he lived in a hole with a 7 to 8 change of getting out of the hole so that's why he started to invent things because he had nothing better to do
a hole forms in the enamel. it can be caused by many things. but decay begins and this hole progresses until it eventual reaches a nerve and becomes infected.
It is a hole because it brings things inside of it, but it's all black so you can't see anything.
He
To change aquario from spike mode to its hole form you have to pull it down to change it to hole mode and push it upward for spike mode
things dont implode in a black hole they are dragged in and the black hole gets bigger
Yes
you have got to change the hole bumper
There are three steps on how to bury things in Scribblenauts. The three steps are create a hole or dig one using a digging tool, place the object in the hole, and then cover the hole with something.
The process of acid burning a hole in clothing is a chemical change. This is because the acid reacts with the fabric, breaking down its chemical structure and forming new substances, ultimately leading to the formation of a hole.