They will be both the same because the perimeter of the square is 32 units and the perimeter of the rectangle is also 32 units
Area and perimeterA square is a special form of rectangle having four equal sides. If each side of the square measures four units, then the perimeter is 16 units and the area is 16 square units. Note that the magnitude -- 16 -- is the same but the units are different. The above can be shown algebraically.If P = 4s and A = s2, then setting P = A yields4s = s24 = s.Their is one other solution when the rectangle is not a square. If two sides are 6 and two sides are 3, the area and the perimeter are the same as well.2(6) + 2(3) = P12 + 6 = P18 = P3 * 6 = A18 = AP = A
Make sure you know the length and width of the rectangle in the SAME UNITS ... both in inches, or both in meters etc. Then just multiply the two numbers ... Length x Width. The answer is the area of the rectangle.
The area of a rectangle is (length) multiplied by (width). The units don't matter. Just make sure that 'length' and 'width' are both measured in the same unit, whatever the unit is.
Right triange with both sides around the 90 degrees = 4 with a right trianle the area = 1/2 * height * width (think of it as half a rectangle)
That will depend on their dimensions but both are worked out in square units
Yes. For example, a 4x4 square would have an area of 16 units squared. A 2x8 rectangle would also have an area of 16 units squared. Also, every rectangle is a square too though every square is not a rectangle. So, a 4x4 square is also a rectangle which means both have the same area.
Surface areas are measured in square units, such as square inches, square feet, square meters, etc. To determine the surface area, first ensure you have the length and width of the rectangle expressed in the same units (both in inches, both in feet, etc.), then multiply the length by the width: 2 feet x 3 feet = 6 square feet
They will be both the same because the perimeter of the square is 32 units and the perimeter of the rectangle is also 32 units
Multiply the length and width to find the area of both a rectangle and square.
not necessarily. take the example of a 3x3 square and a 4x2 rectangle. Both have a perimeter of 12. but the square has an area of 9 and the rectangle has an area of 8.
Area and perimeterA square is a special form of rectangle having four equal sides. If each side of the square measures four units, then the perimeter is 16 units and the area is 16 square units. Note that the magnitude -- 16 -- is the same but the units are different. The above can be shown algebraically.If P = 4s and A = s2, then setting P = A yields4s = s24 = s.Their is one other solution when the rectangle is not a square. If two sides are 6 and two sides are 3, the area and the perimeter are the same as well.2(6) + 2(3) = P12 + 6 = P18 = P3 * 6 = A18 = AP = A
If both diagonals are 10 units then the rhombus is, in fact, a square. Its area is 50 square units.
If the value of "3 X 4.3" given are measurements of the sides of a rectangle and are both in the same dimension of length, then the area is 12 square units of the length units specified for the given dimensions. Questions asking for area should always have a specification of the linear units in which the dimensions of the area are measured.
Make sure you know the length and width of the rectangle in the SAME UNITS ... both in inches, or both in meters etc. Then just multiply the two numbers ... Length x Width. The answer is the area of the rectangle.
The area of a rectangle is (length) multiplied by (width). The units don't matter. Just make sure that 'length' and 'width' are both measured in the same unit, whatever the unit is.
In a rectangle, the area is calculated by multiplying length x width. If (for example) both length and width are in centimeters, the area will be in square centimeters.