0
Add your answer:
Earn +20 pts
How many tiles would you need to cover 320 sq ft?
Depends on the size of the tile. Get the area of the tile and then divide by the area you need to fill.
How many 19.7 floor tile is needed to fill 140 square feet?
You would need 8.
If you have an area of 1344 square feet to fill up how many 12X12 inch tiles do you need?
1344. Each tile is a square foot.
If tiling a wall in the bathroom it is rectangle and measures 168 square feet how many tiles do you need?
The amount of tiles that will be needed will depend on the size of the tile. Example: if you are using a 12" x 12" tile and you have 168 SF to cover than you will need 168 tiles. If you are using 24" x 24" tile than you would need 84 tiles to cover 168 SF. Always remember to allow about 3% to 5% for waste or attic stock...... if the tile gets damaged before installation or if after the installation a tile need to be repaired you will have the additional tile to complete it....FYI tile is die lot sensitive. The same tile you buy today could look different if it is not made from the same run
How many tile 12x12 will i need for 49 sq ft?
12X12=1 Square Foot of tile. You would need 49 Square Feet of tile.
Do you have to tape off seams in durarock before installing tile?
nope just fill the crack with thinset
Can you lay tile over flake board?
Yes, you can but you need to staple a mesh to it. Then fill the mesh with thin-set and let it dry before putting your tile down with thin-set.
How many tiles would you need to cover 320 sq ft?
Depends on the size of the tile. Get the area of the tile and then divide by the area you need to fill.
Do you seal tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
Should you install a bathroom vanity on top of tile or on top of backerboard?
On top of the tile. You may want or need to change it at some point and a new one may not fill the space on the tile.
If you had 2.25 square feet in tile and needed to fill in 56 square feet how many more tile would you need?
Another 53.75 square feet of tile would be needed.
How many 19.7 floor tile is needed to fill 140 square feet?
You would need 8.
What type of underlayment do you need when installing tile floor?
Before installing tile flooring, you need a clean FLAT surface. Tile is not a flexible material so the flat surface ensures the tile will match up correctly. You also need to sand the underneath flooring so that the grout and tile cement will be able to form a cohesive nature with tile and permanently fix the tile to the surface.
Do you have to replace an entire tile floor because of one broken tile?
You can replace just one tile without too much grief. First you need to obtain a look alike tile. Then you need to chisel the existing tile out. Put the new one and regrout with comparable grout as used before.
Do you seal travertine tile before you grout?
Yes, it is recommended to seal travertine tile before grouting to protect it from potential staining or discoloration caused by the grout. Sealing the tile will also make it easier to clean and maintain in the long run.
Do you need a waterproof membrane before installing tile in a bathroom?
Don't HAVE to, but it is a good idea.
If you want to fill a frame measuring 3' by 6' how many tiles would you need if each tile measures 3by 6?
144
