231 cubic inches ==
(presumed that you meant cubic inches, which like gallons is a measure of volume, rather than square inches, which is a measure of area) 1 US gallon = 231 Cubic inches
(presuming you meant cubic inches, which like gallons is a measure of volume, rather than square inches, which is a measure of area)
You don't. Cubic inches is a measure of volume and square inches is a measure of area.
Assuming it is round, (1) convert all measurements to feet. (2) Use the formula for the volume of a cylinder to get the volume in cubic feet. (3) Convert from cubic feet to gallons. As an alternative, you can also convert all measurements to inches, and in the final step, convert from cubic inches to gallons.
You can't convert that. A gallon is a unit of volume; an inch is a unit of length.
Figure the volume in cubic inches and divide by 277.4 to get the number of gallons the container will hold. This is A close approximate formular. Convert the gallons to pints or less if it is a small container.
To calculate barrels per inch, you need to know the volume of the barrel in gallons and the dimensions of the barrel in inches. First, convert the barrel volume to cubic inches (1 barrel = 31.5 gallons = 3,785.41 cubic inches). Then, divide the total volume of the barrel by the height of the barrel in inches. The formula is: Barrels per inch = (Volume of the barrel in cubic inches) / (Height of the barrel in inches).
Square inches is an area, not a volume. You can't convert square inches to gallons. If you meant CUBIC inches, then 682 cu in is 2.95 US Liquid gallons or 2.53 US Dry Gallons.
You cannot convert a measure of area (square feet) to a measure of volume (gallons). Gallons is a measure of volume, or of 3 dimensions. You'd need cubic feet (not square feet) to convert it to gallons.
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
To convert the volume of a cylinder from square inches to liters, you first need to calculate the volume in cubic inches using the formula V = πr^2h. Then, convert cubic inches to cubic centimeters by multiplying by 16.387. Finally, convert cubic centimeters to liters by dividing by 1000.
You can't. One is a measure of length. The other is a measure of volume. You can't go from one to another. Now, if you are talking about 35.5 cubic inches, then we have the ability to convert. 35.5 in³ = 0.153679 gallons
Multiply length by width by height to get volume, then convert to gallons. 216000 in cubed is 935.1 gallons
Square yards can't be converted to gallons. Square yards measure area, while gallons measure volume.
To convert cubic inches to gallons, divide the volume in cubic inches by 231. This gives you the equivalent volume in gallons. In this case, a glass aquarium with a volume of 2315.52 cubic inches will hold approximately 10 gallons of water.
To convert cubic inches to gallons, first find the volume in cubic inches by multiplying the length, width, and height (30 x 18 x 6 = 3240 cubic inches). Then, divide the cubic inches by 231 to convert to gallons (3240 / 231 = 14.03 gallons).
You don't. Cubic inches is a measure of volume and square inches is a measure of area.
A square meter is a unit of area, not volume, so it doesn't directly convert to gallons. Gallons are a unit of volume, typically used to measure liquids. To convert square meters to gallons, you would need to know the depth or height of the area in meters and then calculate the volume in cubic meters. Once you have the volume in cubic meters, you can convert that to gallons using the conversion factor that 1 cubic meter is approximately equal to 264.172 gallons.
Cubic inches is most likely, although gallons is possible.