answersLogoWhite

0

131,328 in3, but you should have worked it out for yourself.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the recommended depth and size of a concrete footing for a deck post?

The recommended depth and size of a concrete footing for a deck post is typically 12 inches in diameter and 36 inches deep. This provides a stable foundation to support the weight of the deck and prevent settling or shifting.


How much concrete does it take for a footing 100 ft long 2 ft wide 5 inches deep?

you will need about 4 cuyds for your project.


What is the recommended method for installing a concrete footing for a 6x6 post?

The recommended method for installing a concrete footing for a 6x6 post is to dig a hole that is at least 12 inches in diameter and 24 inches deep. Place a cardboard tube form in the hole and fill it with concrete, making sure it is level. Insert a post anchor into the wet concrete and allow it to cure for at least 24 hours before attaching the post.


What is the recommended method for creating a stable foundation using concrete footing for a 4x4 post?

To create a stable foundation using concrete footing for a 4x4 post, the recommended method is to dig a hole that is at least 12 inches in diameter and 24 inches deep. Place a cardboard tube form in the hole and fill it with concrete, making sure it is level and plumb. Insert a post anchor into the wet concrete and allow it to cure for at least 24 hours before attaching the post. This will provide a strong and stable foundation for the post.


How deep is deep-water zone?

the deepis is 24ft


How much concrete is needed to fill an area 24ft x 12 ft?

You need to specify how deep the area is to answer the question; this is a volume problem. Please ask again


How much concrete will you need to fill a hole that is 18 inches around and 24 inches deep?

about 432 cubic inches


If your 24ft round pool has 6300 gallons in it how deep would it be?

It would be about 1.8535 feet deep.


How to Construct Proper Footings for Your Deck?

A well-constructed deck must have proper footings in order to be stable and secure. Make sure to dig your footing holes deep enough so that they are on undisturbed soil and sit below the deepest point of frost penetration. Once the holes are dug, line the bottoms with gravel for drainage, then pour concrete into the holes. The footing depth in inches divided by eight will tell you how many bags of concrete mix you need.


How much area does a yard of concrete cover at six inches deep?

54sqare feet


How much concrete will it take for a slab 10x16 feet?

If it is 4 inches deep/thick, 2 cubic yards. If it is 6 inches deep/thick, 3 cubic yards.


How deep and wide should a footer be for a concrete pad?

The depth and width of a footer for a concrete pad will depend on various factors such as the load that will be placed on the pad, soil conditions, and local building codes. Generally, footers are often at least 12 inches deep and extend beyond the pad on each side by at least 6 inches. It is recommended to consult a structural engineer or local building authority for specific requirements for your project.