1.5 gm = 1,500 mg
1963 US dimes, quarters, and half dollars were made of an alloy of 90% silver and 10% copper. The alloyed and pure silver weights of these coins were: Dime: 2.5 gm / 2.25 gm Quarter: 6.25 gm / 5.625 gm Half: 12.5 gm / 11.25 gm
Amorphous polypropylene has a density of 0.855 gm/cm3. To convert to gm/cubic inch, 0.855 gm/cm3x16.39 cm3/cubic inch = 14.0 gm/cubic inch
NOTHING ... gm sucks !
Morgan and Peace dollars - 26.7 gm Eisenhower dollars - 22.7 gm SBA, Sacagawea, and Presidential dollars - 8.1 gm
No. The 6.2 diesel used by GM, by the way, was made not by GM, but by Detroit Diesel.
This motor is not compatible with diesel engine parts. As this motor is generally used in smaller GM cars that are a little more than lightweight. You would need a motor for a GM truck to match with diesel parts.
No
Probably not. This is a very common GM gasoline engine. If it were diesel, it would say diesel somewhere. The diesel engines are 7.3 liters
GM tried that once back in the 1980s. They took one of their gasoline engines and attempted to convert it to run as a diesel engine. To say that the results were less than satisfactory would be an understatement. It was a disaster. Diesel engines have to be built to handle stronger compressions than gasoline engines. GM's engines quite literally beat themselves to pieces. If GM can't do it, it is doubtful that you and I can not either. But maybe I am being too pessimistic. GM is rather noted for its failures which seem to vastly outnumber its successes. The Corvair. The Vega. Those are two of their most outstanding failures but neither stands with their attempt at building a diesel on the cheap.
550lb of tourqe
Well since it is a GM vehicle and the name for all GM authorized is Mr. GoodWRENCH it might mean that you need something there ie. alignment, tire rotation, oil change, some type of regular maintenance
You can find a Vacuum hoses diagram for gm diesel 6.5 at any department stor. They can be found at Sears or auto motor store. They are also available on Ebay for a bid.
Brand is not so important, but get at least 850 CCA and 1000 CA for the 6.5 GM diesel.
EcoTech is an emission technology implemented on GM's diesel and petrol engines.
how do you change serpentine belt gm 3.4 2003 venture
The rotation would be clockwise. The firing order would be 1, 8, 4, 3, 6, 5, 7, 2.