Uranium has a density of 19 grams per cubic centimeter, so you'll have to convert the grams to pounds and the cubic centimeters to cubic inches. Since 1g = 0.00220462280lb, then 19g = 19 x 0.00220462280lb, which = 0.041887833lb, or about .042lb. Now convert cubic centimeters to cubic inches: 1 cubic centimeter = 0.061023744100 cubic Inches = about .061 cubic inches 19g/cc is the equivalent of .042lb/.061 cubic inches, which divides out to about .69 pounds per cubic inch.
It ranges from 0.033 pounds per cubic inch to 0.043 pounds per cubic inch.
Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.Since a foot has 12 inches, a cubic foot has 123 cubic inches, equal to 1728 cubic inches.
lead density is 0.41 pounds/cubic inch 1.68 x 0.41 = 0.688 pounds
There are 63,360 inches to one mile (5280 feet x 12 inches), so one cubic mile = 63,3603 cubic inches = 254,358,061,056,000 cubic inches. To convert cubic inches to cubic miles, simply divide the number if cubic inches by 254,358,061,056,000 and the quotient will be the number of cubic miles.
The density of polypropylene is typically around 0.895 grams per cubic centimeter (g/cm^3). It is a lightweight and versatile thermoplastic polymer that is widely used in various applications due to its excellent balance of properties such as strength, stiffness, and chemical resistance.
To convert pounds (lb) to cubic inches (in³), you need the density of the material. The conversion is based on the formula: 1 pound = 27.68 cubic inches for water (density = 62.4 lb/ft³). So for 194 lbs, the volume in cubic inches would be 194 * 27.68 = 5,366.72 in³ if it were water.
In addition to volume, density depends on mass. There is no information about mass in the question.
The density is 128 and an eighth grams per cubic inch.
Nothing. Unless you are using inches as part of a density statement in which case it would be cubic inches.
Yes, polypropylene would float on mercury due to its lower density compared to mercury. Polypropylene has a density of around 0.9 g/cm³, while mercury has a density of about 13.6 g/cm³, making polypropylene less dense and causing it to float on mercury.
To calculate the volume of the steel ingot, we need to know the density of steel. The density of steel is around 0.284 pounds per cubic inch. Therefore, to find the volume in cubic inches, we divide the weight (4000 pounds) by the density (0.284 pounds per cubic inch) to get 14,084.5 cubic inches. Finally, to convert cubic inches to cubic feet, we divide by 1728 (since 1 cubic foot = 1728 cubic inches), resulting in a volume of approximately 8.15 cubic feet.
Divide 4.6 lbs by the lead density in lbs/cubic inch
Uranium has a density of 19 grams per cubic centimeter, so you'll have to convert the grams to pounds and the cubic centimeters to cubic inches. Since 1g = 0.00220462280lb, then 19g = 19 x 0.00220462280lb, which = 0.041887833lb, or about .042lb. Now convert cubic centimeters to cubic inches: 1 cubic centimeter = 0.061023744100 cubic Inches = about .061 cubic inches 19g/cc is the equivalent of .042lb/.061 cubic inches, which divides out to about .69 pounds per cubic inch.
Polypropylene has a density below 0.91 g/m3 make it one of the lightest plastics, slightly lighter than polyethylene which has density below 0.96 g/cm3.
It ranges from 0.033 pounds per cubic inch to 0.043 pounds per cubic inch.
You need the density to this question. Density is mass per unit volume usually expressed in grams per cubic centimeter or kilograms per cubic meter. You can conver either of these to ounces per cubic inch using Google.