0
How can you cut a 8 foot by 3 foot board into two pieces so that both pieces together cover a 12 foot by 2 foot board?
With the board with the 3 ft edge towards you mark 1 ft from the right hand edge. 4 ft along the right hand edge mark in 1 ft. Join the 1 ft marks.
Turn the board around so that the other 3 ft ends is towards you and repeat the markings.
Now join the ends of the lines at the centre of the board (with should be 1 ft long).
Now cut along the lines.
Shift the right hand piece up and left so that the cut edge is on top of the 8 ft length to create a board almost* 12 ft by 2 ft:
========================
|...................................................................|..............................===================================
|..................................===========|..................................|...................................................................|...............................|
|...............................|................................|...........==>...............|..................................============...............................|
|===========..................................|..................................|...............................|..................................................................|
|...................................................................|..................................===================================
========================
* If you use a saw to cut the board, you will lose some of the board into sawdust.
What else can I help you with?
How can you cut an 8 foot by 3 foot board into two pieces so that both pieces together cover a 12 foot by 2 foot hole?
There is no way to do this with two pieces. You can do it with 4 (making each 3 by 2) The only way is by having three pieces.... note: The total area is the same so it has to be possible (24sf) 2 cuts total (3 pieces): STEPS>>> 1st: Cut the board into two pieces. Making one piece 8'x2 the other piece then is 8'x1'. 2nd: Cut the 8'x1' piece into half making two 4'x1' pieces. 3rd: Place the two 4'x1' pieces together to make it 4'x2'. 4th: Place the 8'x2' & new 4'x2' pieces together for your desired dimension, 12'x2'
How are checkers and chess alike?
both games require two people to play, the object is to get as many things out as possible, there are two different colors, you move the pieces, you play on a board, you have to think of a stratigy :)
How many pieces are there if you cut an eighty inch ribbon and a thirty two inch object into equal pieces?
In order for there to be equal pieces, the length of the pieces must be factors of both the length of the ribbon and the object. Thus, there are actually many answers. For example: 2,4,6,8, and 16 inch pieces both work.
A 42 foot board is cut into two pieces. Four times the shorter piece is equal to the sum of the longer piece and thirteen. Find the lengths of both pieces.?
Using algebra it works out that the lengths are 8.4 feet and 33.6 feet because 4*(8.4) = 33.6 and 8.4+33.6 = 42 feet
A bullentin board is 36 in long a chalkboard is 48 in long how many feet long are both items?
bullentin board is 3 feet, chalk board is 4 feet,
How can you cut an 8 foot by 3 foot board into two pieces so that both pieces together cover a 12 foot by 2 foot hole?
There is no way to do this with two pieces. You can do it with 4 (making each 3 by 2) The only way is by having three pieces.... note: The total area is the same so it has to be possible (24sf) 2 cuts total (3 pieces): STEPS>>> 1st: Cut the board into two pieces. Making one piece 8'x2 the other piece then is 8'x1'. 2nd: Cut the 8'x1' piece into half making two 4'x1' pieces. 3rd: Place the two 4'x1' pieces together to make it 4'x2'. 4th: Place the 8'x2' & new 4'x2' pieces together for your desired dimension, 12'x2'
Is an ironing board cover a conductor or insulator?
An ironing board cover that is only fabric would be more of an insulator between the wood or metal surface of the ironing board. An ironing board cover with a foam backing and an aluminum type fabric on top would be both an insulator as well as a conductor of heat, to have heat distribute more evenly through the item being ironed.
How do you glue two pieces of cork together?
To glue two pieces of cork together, use a strong adhesive such as E6000 or a contact cement. Apply the adhesive to both surfaces, press the pieces together firmly, and allow the glue to dry according to the manufacturer's instructions. Clamp the pieces together if necessary to ensure a secure bond.
How can I effectively screw two pieces of wood together at an angle?
To effectively screw two pieces of wood together at an angle, you can use a drill to create pilot holes in both pieces of wood before driving the screws in. This will help prevent the wood from splitting and ensure a secure connection. Additionally, using a clamp to hold the pieces of wood together while screwing them will help maintain the desired angle.
How many pieces in a backgammon set?
Both players have 15 "men" at the beginning of a Backgammon game.
What are the key differences between a jointer and a planer, and how do they each contribute to the woodworking process?
A jointer is used to flatten and straighten the edges of a board, while a planer is used to make the board's surface smooth and even. The jointer helps create a flat surface for joining pieces together, while the planer ensures a consistent thickness for the final product. Both tools are essential in preparing wood for woodworking projects by improving the quality and accuracy of the wood pieces.
If Rix can collect 45 pieces in 1 min and Rax take 1 and half minute for same what is time required to collect 300 pieces when both working together?
8
Do anion pieces fit with other anion pieces?
Yes, anion pieces are both negatively charged molecules or ions that can fit together due to their complementary charges and shapes. These pieces can form bonds and interact with each other to create larger structures or molecules.
How do you join two pieces of wood with screws?
Drill a hole in the first board the diameter of the screw and screw into the second board. This will pull the two boards together. If you screw through both boards without the hole the first one will lift slightly when the screw goes through so the boards will not be held tight together.
How do you replace the valve cover gaskets on a 2003 Jeep Liberty?
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
How can I ensure a strong bond when applying wood glue to join two pieces of wood together?
To ensure a strong bond when applying wood glue to join two pieces of wood together, make sure to apply an even layer of glue on both surfaces, clamp the pieces tightly together, and allow sufficient drying time as per the glue manufacturer's instructions. This will help create a secure and durable bond between the two pieces of wood.
What kind of flower is the one on the cover of new moon?
it is a ruffled tulip to symbolyse Bella and the blood to symbolise edward both look beautifull together as if they were meant to be together
