0
What else can I help you with?
What do you do for a deep cut on the bottom of your foot?
how do I treat deep cut under foot
How much stone do I need to cover 1440 sq ft 4 deep?
5760 cubic feet of stone.
How much stone is needed to cover a 16 foot by 16 foot area?
2.37 cubic yards of stone for every 3 inches deep it needs to be
How many square feet does one ton of crushed stone cover 4 inches deep?
36
How much gravel is needed for 30 feet by 50 feet?
That depends on how deep you want to spread it. On that area, it takes 0.463 cubic yards for every inch deep.
It took 17.89 seconds for a rock to hit the bottom of the canyon how deep is the canyon?
It takes 175,32 seconds
If a rock takes 6 seconds to hit the bottom of a HOLE how far is the bottom?
about five metres deep
A student drops a stone into a mine shaft It takes 3 seconds for the stone to hit the bottom of the shaft How deep is the mine?
The depth of the mine can be calculated using the formula: distance = 0.5 * acceleration due to gravity * time^2. Given that the time taken for the stone to hit the bottom is 3 seconds, we can substitute this into the formula along with the acceleration due to gravity (9.8 m/s^2) to calculate the depth of the mine. The depth of the mine would be approximately 44.1 meters.
If it takes 6 seconds for a stone to fall to the bottom of the mine how deep is the mine?
The depth of the mine can be calculated using the formula: distance = 1/2 * acceleration due to gravity * time squared. Given the time is 6 seconds and the acceleration due to gravity is about 9.8 m/s^2, the depth of the mine would be approximately 176.4 meters.
If you drop a stone into a well that is 118.5 m deep how soon after you drop the stone will you hear it hit the bottom of the well?
About 5.26 seconds. (almost 4.92 seconds to hit, 0.35 sec for the sound to return)You need to find how long it takes for the stone to drop to the water and makean audible 'sploosh', and then find how long it takes for the sound to reach youfrom the depths. The acceleration g is about 9.8 m/sec2.Time to sploosh:x = 1/2 g T2118.5 = 4.9 T2T = sqrt(118.5/4.9) secondsTime for the sound to return to the top: (Use 340 meters per second)118.5/340 secondsTotal time between the drop and hearing the sploosh:sqrt(118.5/4.9) + (118.5/340 ) = 5.26 seconds(rounded)
How long does it take to get to the bottom of Challenger Deep?
It takes approximately 2 to 2.5 hours to descend to the bottom of Challenger Deep, the deepest known point in the Earth's seabed, using a submersible. The return trip to the surface takes a similar amount of time.
When was The Bottom Deep created?
The Bottom Deep was created in 2011.
It takes 6 s for a stone to fall to the bottom of a mine shaft. How deep is the shaft?
Ignoring air resistance, or bouncing off the sides of the shaft on the way down ...-- Speed when you let it go = 0-- Speed after 6 seconds = 6 G = 58.84 meters per second-- Average speed = 1/2 (0 + 58.84) = 29.42 meters per second-- In 6 seconds, at an average speed of 29.42 meters per second,it fell 176.5 meters.
Which stone not deep in water?
The stone name is never deep in water hajra aswad this stone come from heaven and present in saudia arabia
How deep is Big Stone Lake?
Big Stone Lake is 965 ft. (294 m) deep! :0
What is the duration of A Sheep in the Deep?
The duration of A Sheep in the Deep is 360.0 seconds.
What is the duration of Bells from the Deep?
The duration of Bells from the Deep is 3600.0 seconds.
