172.72cm
On a standard ruler, 2.39 inches would fall between the 2-inch mark and the 3-inch mark. Each inch on a ruler is typically divided into 16 equal parts, known as sixteenths. So, 2.39 inches would be just past the 2 3/8 inch mark and slightly before the 2 7/16 inch mark on the ruler.
It is indeed 2 inches, although it's equivalent improper fraction is 16/8 (units of 1/8 inch; 8 times or 8/8,s of an inch for 1 inch and 2 8/8,s of an inch totals 16/8)
5/8 of an inch
8
172.72cm
1/8 th -3/4 in per ft
5/8 inch spark plug socket.5/8 inch spark plug socket.
It is 6 Th.
1/8 th inch, a little more if you encounter wet roads to help prevent hydroplaining..
Divide both sides by 12 to change to feet:- 8/12 times 16/12 = 8/9 square feet
.054 inch ( for L and Z engine code - 8 th " character " of VIN ) .044 inch ( M engine code - runs on natural gas )
3/8
1/8 of 64 = 8
this a type of beam which contain the depth of slab in its depth. and if you want to decrease the depth of beam then just design it again reducing the depth from 12 inch to 8 inch it will change the required area of steel and grade of concrete. thats it
it is going to be on the 7 th and 8 th
It is indeed 2 inches, although it's equivalent improper fraction is 16/8 (units of 1/8 inch; 8 times or 8/8,s of an inch for 1 inch and 2 8/8,s of an inch totals 16/8)