There is NO way to calculate this without knowing how deep the pool is filled!
A 20 foot round pool has a radius of 3.2 feet. So the pool has a volume of pi*r2*h = 101.86 cubic ft approx.
Here's a good resource and the formula necessary to calculate water volume in a swimming poo... http://www.backyardcitypools.com/swimming-pools/Pool-Volume-Calculate.htm (may need to copy/paste link) Hope this helps.. Terry Duff
length(M) x width(M) x average depth(M) you will get pool volume in cubic meter. convert it in to gallons or any other unit
The circumference is 50.24 meters.
There is NO way to calculate this without knowing how deep the pool is filled!
To calculate the volume of a swimming pool in cubic feet, you'll need to measure the length, width, and depth of the pool. Once you have these measurements in feet, you can multiply them together to get the volume in cubic feet (Length x Width x Depth). This will give you the total amount of space the pool can hold.
To calculate the volume of your pool assuming is the most common rectangular kind. multiply width X length X average depth X 7.5 to get the volume in gallons.
A 20 foot round pool has a radius of 3.2 feet. So the pool has a volume of pi*r2*h = 101.86 cubic ft approx.
It depends on the size of the swimming pool. First, figure out how big your cup is (the max volume it can hold) then how big your pool is (max volume of the pool). Divide the volume of the pool by the volume of the cup. That will be your answer. Ex: the cup's volume is 8 cm cubed and the pool's volume is 8000 cm cubed.dived 8000 cm3 by 8 cm3:8000/8 = 1000Therefore, the answer to this example is that there are 1000 cups of water in the swimming pool.
To fill up a 12 foot swimming pool, you would need approximately 6,900 gallons of water.
You could calculate it by finding the volume of water in the pool (in cubic metres), the average depth of the pool (in metres) and the width of the pool (also in metres).Then, linear metres = volume/(average depth*width).However, rather than calculating the linear metres, it might be simpler to just measure the length of the pool.
Here's a good resource and the formula necessary to calculate water volume in a swimming poo... http://www.backyardcitypools.com/swimming-pools/Pool-Volume-Calculate.htm (may need to copy/paste link) Hope this helps.. Terry Duff
Assuming the pool is 4 feet deep, a 15ft round pool would have a volume of approximately 17.6 cubic meters of water. This calculation is based on the formula for the volume of a cylinder (V=πr^2h) using the radius of the pool (7.5ft) and its depth (4ft).
Sure, it could. If the pool is a 4 foot deep, 20 foot round pool. I'm sure there are a variety of other dimensions that would also match that pool volume.
Litres.
length(M) x width(M) x average depth(M) you will get pool volume in cubic meter. convert it in to gallons or any other unit