answersLogoWhite

0

When the loadicator fails, you can calculate the SF (Safe Factor) BM (Bending Moment) by using the vessel's hydrostatic tables and stability data. First, determine the vessel's weight and the distribution of loads, including cargo, ballast, and fuel. Then, compute the center of gravity (CG) and the center of buoyancy (CB) to find the metacentric height (GM). Finally, use the formula (BM = \frac{I}{V}), where (I) is the moment of inertia of the hull shape and (V) is the submerged volume, to estimate the bending moment and subsequently the safe factor.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Continue Learning about Math & Arithmetic

How do you calculate parking ratio per 1000 sf?

To calculate the parking ratio per 1,000 square feet (sf), divide the total number of parking spaces by the total square footage of the building or area in question, then multiply the result by 1,000. The formula is: (Number of Parking Spaces / Total Square Footage) × 1,000. This gives you the number of parking spaces available for every 1,000 square feet of space. For example, if there are 50 parking spaces for a 20,000 sf building, the ratio would be (50 / 20,000) × 1,000 = 2.5 spaces per 1,000 sf.


How to calculation blank dia for dish head?

Formula to calculate the Blank Diameter: ID+ID/24+(2/3*KR)+2*SF Where, ID = Inner Diameter KR = Knuckle Radius(generally it will be taken 15% of ID) SF = Straight Face


How many sf in a sy?

There are 9 square feet (sf) in a square yard (sy). This is because a square yard is defined as a square with each side measuring 3 feet, and when you calculate the area (3 feet x 3 feet), you get 9 square feet.


When was SF Grei created?

SF Grei was created in 1919.


Why is it important to be able to determine the number of significant figures properly?

For any arithmetic operation, the number of significant digits in the operands determines the maximum number of significant digits in te answer. There is no point in trying to calculate a highly precise answer if your operands cannot justify it. For example, if you are using pi = 3.14, (3 sf) then there is no point in measuring the radius of a circle to 7 sf and giving its area to 10 sf.