miles per hour x 88 = feet per minute
1 rotation/1 min * 1 min/60s * (2*Pi radian/1 rotation)
The radian is 0.523598776
1 degree = pi*radian/180 So therefore 15 times pi*radian/180 = pi*radian/12
"Radian" is a distance. "Revolution per minute" is a speed. Those two units measure different quantities, and they don't convert into each other. It'll help to know that 1 revolution is (2 pi) radians. So "one revolution per minute" is "2 pi radians per minute", etc.
1 revolution = 2PI radian. 2 revolutions = 4PI radian The angular speed of the Ferris wheel is 4PI radians . Multiply by the radius. The linear speed is 100PI feet per minute.
miles per hour x 88 = feet per minute
1 rotation/1 min * 1 min/60s * (2*Pi radian/1 rotation)
Calculate the volumeof whatever is being paid for, in cubic feet, then multiply that number of cubic feet by the cost per cubic foot.
There is not enough information to answer this question.
You cannot do that. Do you mean gallons per second to hours?
1 US gallon = 0.133680556 feet^3
Easy. The conversion factor is 1.466. So, 70 mph x 1.466 = 102.62 feet per second.
The radian is 0.523598776
You measure the distance travelled and convert it to feet. You measure the time taken for travelling that distance and convert that it to minutes. You divide the first by the second and you have feet per minute.
To calculate traveling feet per second, you would typically divide the distance traveled in feet by the time taken in seconds. The formula is: Feet per Second = Distance (in feet) / Time (in seconds)
To convert pounds-feet per second into horsepower, use the formula: Horsepower = (pounds-feet per second) / 550 This conversion assumes that 1 horsepower is equivalent to 550 pounds-feet per second.