the bend length is triple time divided and four time added with your lucky number whatever it is and subtract with your mobile number AND then multiply with zero
and finally we get the total length of bend
Chat with our AI personalities
If we assume that the pipe is completely full of oil, it would just be the volume of the pipe = pi * r2 * l, where pi = 3.14159, r = radius, and l = length of the pipe. If the pipe is not full, then multiply the volume by the percentage of oil in the pipe. For example, if 50% full, then multiply by .5. If the pipe bends, take into account the different volume of the bend. If the bend is 90 degrees, this can be accomplished by taking the average length of the two bent segments for the length.
measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
You need the inside radius (1/2 the inside diameter) of the pipe and the pipe's length. Then, use this formula:Volume = Pi x r2 x length
2*pi*radius*length measured in square units
1 meter = 39.4 inches 1 inche = 0.025 meters