This question cannot be answered sensibly. A pound per square inch is a measure of pressure, with dimensions [ML-2]. A pound is a measure of mass, with dimensions [M]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.
*see the related question
Multiply by 144, since there are 144 square inches in a square foot (12x12).
Multiply newtons per square meter (N/m2) by 0.000145
psi x 6,895 equals newtons per square meter (N/m2)
1000 pounds per square inch (ksi) = 6894.76 kPa, so 1 ton (2000 pounds) per square inch = 13789.52 kPa,and 20 tons per square inch = 275790.4 kPa = 275.7904 MPa[megaPascal].I used ConvertWorld to help with the conversions. See related link.20 tons per square inch = 275.790 megapascals20 tons/in2 = 40000 pounds/in2 (psi)Multiply psi by 0.006894759087 to convert from psi to MPa40000 psi * 0.006894759087 MPa/psi = 275.790 (Googled the conversion rate)
Inches of mercury x 0.4912 equals psi
23,000 pounds per square inch equals 16170000kg per square meter.
To convert pounds per square feet to pounds per square inch, you need to divide by 144 since there are 144 square inches in a square foot. In this case, 32 pounds per square foot would be equal to 0.222 pounds per square inch.
Pounds per square foot x 0.006944 equals psi
Inches of water x 0.03613 equals pounds per square inch (psi).
Multiply by 144, since there are 144 square inches in a square foot (12x12).
To convert pressure from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor 1 Pa 0.00014503773773 psi. Multiply the pressure in pascals by this conversion factor to get the pressure in pounds per square inch.
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
4.5 bar is equivalent to approximately 65.26 pounds per square inch.
To convert pressure units from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor of 1 psi 6894.76 Pa. Simply divide the pressure in pascals by 6894.76 to get the equivalent pressure in pounds per square inch.
Multiply newtons per square meter (N/m2) by 0.000145
1,348.85 pounds per square inch.
psi x 6,895 equals newtons per square meter (N/m2)