Use a saw.
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
To determine how many 9-inch by 15-inch pieces can be cut from a 4-foot by 8-foot sheet of wood, first convert the dimensions to inches. A 4-foot by 8-foot sheet is 48 inches by 96 inches. The area of the sheet is 48 x 96 = 4,608 square inches, and the area of each piece is 9 x 15 = 135 square inches. Dividing the total area of the sheet by the area of each piece gives 4,608 ÷ 135 ≈ 34.2, so you can cut a maximum of 34 pieces.
10,560
To determine how many W-inch sections you can get from a 9-foot piece of plywood, first convert the length of the plywood into inches. Since 9 feet equals 108 inches, you would divide 108 inches by W inches. The formula would be: Number of sections = 108 / W. The result will give you the total number of W-inch sections you can cut from the 9-foot plywood.
In order for there to be equal pieces, the length of the pieces must be factors of both the length of the ribbon and the object. Thus, there are actually many answers. For example: 2,4,6,8, and 16 inch pieces both work.
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
Depends on how big you cut the pieces. If you cut 2x2 inch pieces, a 12x18 cake will yield 54 servings.
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
exactly 20 of them
Five. Anything cut into fifths will produce five pieces.
12
To install vinyl sheet flooring on plywood, first ensure the plywood is clean, dry, and level. Apply a primer to the plywood and let it dry. Cut the vinyl sheet to fit the room, leaving a small gap around the edges. Roll out the vinyl sheet and press it firmly onto the plywood, smoothing out any air bubbles. Trim any excess vinyl and apply a seam sealer if needed. Allow the adhesive to set according to the manufacturer's instructions before walking on the floor.
To build plywood cabinets, you will need to measure and cut the plywood to the desired dimensions for the cabinet pieces. Assemble the pieces using wood glue and screws, making sure to reinforce the joints for stability. Finish the cabinets with paint or stain for a polished look.
To find out how many 3.5 inch pieces can be cut from a 63-inch ribbon, divide the total length of the ribbon (63 inches) by the length of each piece (3.5 inches). The calculation is 63 ÷ 3.5 = 18 pieces. Therefore, 18 pieces of 3.5 inches can be cut from a 63-inch ribbon.
51 pieces of 2 inch lengths adds up to 102 inches. These cannot be cut from a strip which is only 66 inches long.
12
To build a plywood box, you will need to measure and cut the plywood pieces to the desired dimensions. Then, assemble the pieces using wood glue and screws or nails. Make sure to reinforce the corners for stability. Finally, sand the edges and finish the box with paint or stain if desired.