Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
1 foot = 12 inches so 9 ft = 9*12 inches so 9 sections!
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.
The easiest way to determine an honest weight of a 4' x 8' sheet of plywood? 20-25 pounds per 1/4" of thickness. 3 pounds per square foot per inch of thickness according to APA Plywood Design Specification.
3/4 inch plywood takes 48 sheets to make a unit.
You need to cut a 9 foot piece of plywood into 12 inch sections. Every cut also removes 1/8 inch. How many 12 inch sections can you get out of the 9 foot piece of plywood?
1 foot = 12 inches so 9 ft = 9*12 inches so 9 sections!
The weight of 1.5-inch plywood can vary depending on the specific type and density of the wood used. On average, 1.5-inch plywood can weigh approximately 3.2-4.8 pounds per square foot.
when asking this question you first need to take into account that plywood comes in different thicknesses therefore weight per particualr thickness of sheet plywood will vary-- in my opinion/ without fact and research / a sheet of 1/2 inch plywood may way about 16 lbs. while a 3/4 inch plywood sheet may way 70 lbs.
4 sheets approximately 24 inches by 48 inches can be made from a 4 foot by 8 foot piece of plywood. The reason it is approximate is the kerf of the saw blade takes up about 1/16 of an inch.
The amount of weight a half-inch sheet of plywood can hold will depend on the grade and type of plywood, as well as the size of the sheet and how the weight is distributed. As a general guideline, a half-inch sheet of plywood can typically hold between 40-60 pounds per square foot when evenly distributed.
18 pieces. 48 / 16 = 3 72 / 12 = 6 6 * 3 = 18 pieces
A three quarter inch plywood trailer floor can typically support a distributed load of about 50-60 pounds per square foot. However, the weight capacity may vary depending on the quality of the plywood used and the design of the trailer.
The answer depends on the shape of the 9 square foot piece of fabric. If the piece is 36 feet x 3 inches, for example, you will not get a single 5 inch square from it.
¼-inch plywood 0.31 3/8 inch plywood 0.47 ½-inch plywood 0.62 5/8 inch plywood 0.78 This is taken from http://www.sizes.com/units/rvalue.htm, which also has some other materials that could/would commonly be used alongside with plywood to increase the R Value such as building paper and insulation... if both sides of the frame are ply then you must also include the void.
The easiest way to determine an honest weight of a 4' x 8' sheet of plywood? 20-25 pounds per 1/4" of thickness. 3 pounds per square foot per inch of thickness according to APA Plywood Design Specification.
The weight of .75 inch plywood varies based on the type of wood used. On average, a sheet of .75 inch softwood plywood weighs about 61 pounds, while a sheet of .75 inch hardwood plywood weighs around 75 pounds.